TAIKOR (TECHNONICOL)
TN-POL TAIKOR Decor system — coloured thin-layer floor for production premises
Coloured thin-layer floor of TAIKOR Primer 150 primer-enamel and Top 425 enamel for production premises with dry and wet processes.
Price on request
TAIKOR (TECHNONICOL)
TAIKOR Top 470 — universal alkyd-urethane primer-enamel for concrete and metal
Top 470 is a one-component alkyd-urethane primer-enamel that paints metal and concrete with a single material. For floors, the manufacturer offers it as economical painting of a concrete substrate under light or moderate loads. The matt coating is UV-resistant, dries to degree 3 in 1 hour at +20 °C, fully cures in 48 hours, and can be applied at temperatures from −30 to +35 °C. Adhesion to concrete at least 2 MPa, service from −60 to +110 °C.
Specifications
| Manufacturer | TAIKOR (TECHNONICOL) — OOO “TECHNONICOL – Construction Systems” |
|---|---|
| Type | varnishes and finishing coats |
| Base | one-component matt UV-resistant alkyd-urethane primer-enamel; non-volatiles 57; 60 % (±3) |
| Colour | matt |
| Packaging | Euro pail 20 kg |
| Application method | painting of metal and concrete, incl. 'economical painting of a concrete floor substrate under light or moderate load'; spraying (airless/pneumatic), brush, roller; thinning with xylene up to 10 % (up to 20 % by agreement); next coat after drying to tack-free |
| Application temperature | from -30 to +35 °C; relative humidity no more than 80 % |
| Curing | drying to degree 3 at (20±2) °C no more than 1 h; interval before the next coat at least 1 h; full cure 48 h |
| Key properties | Adhesion to concrete at least 2 MPa (GOST 28574); adhesion to steel no more than 1 point; film impact strength at least 50 cm; flexural elasticity no more than 1 mm; service -60…+110 °C; resistance to water and mineral oil at least 48 h; density 1.4 g/cm3 |
| Layer thickness | 60-80 µm (one coat) |
| Consumption | 0.240-0.320 kg/m2 per coat (theoretical) |
| Shelf life | 12 months; storage and transport -40…+40 °C |
| Standards | TU 2313-101-72746455-2016 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by TAIKOR (TECHNONICOL)
TAIKOR (TECHNONICOL)
TAIKOR Top 425 polyurethane finishing enamel — UV-resistant floor finish
Light- and weather-resistant polyurethane enamel for thin-layer floors in car parks, warehouses, stands and outdoor areas; winter version applied down to −10 °C.
Price on request
TAIKOR (TECHNONICOL)
TN-POL TAIKOR Quartz system — thin-layer wear-resistant floor with quartz
Economical thin-layer floor based on TAIKOR Primer 150, quartz sand and Top 425 enamel for warehouses, car parks, stands and footpaths; UV-resistant.
Price on request
TAIKOR (TECHNONICOL)
TN-POL NALIVNOY PU Antistatic system — TAIKOR antistatic floor
Antistatic polyurethane floor system with copper tape and TAIKOR Floor 720 AS for explosion-hazard production, electronics and filling stations; up to 10⁶ Ω.
Price on request
TAIKOR (TECHNONICOL)
TAIKOR Floor 720 self-levelling compound — elastic polyurethane floor
Elastic polyurethane self-levelling compound without a strong odour for workshops, warehouses, car parks and public buildings; elongation at break from 10%.
Price on request
TAIKOR (TECHNONICOL)
TAIKOR Primer 150 epoxy primer (primer-enamel) — for concrete and steel
Epoxy primer-enamel for thin-layer polymer floors in car parks, warehouses and cold stores, as well as steel; application from −10 °C.
Price on request