The coloured dust-free TN-POL TAIKOR Decor coating consists of one coat of TAIKOR Primer 150 primer-enamel and two coats of TAIKOR Top 425 polyurethane enamel tinted to RAL. It is resistant to moderate mechanical impact and ultraviolet, non-sparking; fire performance — RP1, V1, D2, T2. The system is suitable for production premises with dry and wet processes and minor temperature fluctuations under moderate and medium loads; it is not recommended for offices and shops with high decorative requirements.
| Manufacturer | TAIKOR (TECHNONICOL) — OOO “TECHNONICOL – Construction Systems” |
|---|---|
| Type | floor material |
| Use | production workshops, wet premises |
| Base | coloured thin-layer wear-resistant floor: TAIKOR Primer 150 (1 coat) + TAIKOR Top 425 (2 coats) |
| Colour | finishing enamel tinted to RAL |
| Application method | substrate: compressive strength at least 15 MPa, pull-off at least 1.5 MPa, moisture no more than 4 %; TAIKOR Primer 150 in one coat (spraying/roller/brush), finish TAIKOR Top 425 in 2 coats to a slight gloss; work at sub-zero temperatures possible (winter Top 425) |
| Application temperature | by material: Primer 150 -10…+35 °C; Top 425 summer +5…+35 °C, winter -10…+10 °C |
| Curing | additional coat of enamel not earlier than after 2 h at 20 °C |
| Key properties | Service temperature -60…+110 °C; RP1; V1; D2; T2; non-sparking — yes; dust-free, resistant to moderate mechanical impact, UV-resistant |
| Consumption | TAIKOR Top 425 0.170 + 0.170 kg/m2; TAIKOR Primer 150 0.185 kg/m2 |
| Standards | GOST R 51032, GOST 30402, GOST 12.1.044, STO 004-02495342 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
One-component matt primer-enamel for economical painting of concrete floors with light and moderate loads, as well as metal; application from −30 °C.
Epoxy primer without a strong odour for TAIKOR Floor self-levelling floors and a binder for repair compounds; adhesion to concrete from 2 MPa.
Economical thin-layer floor based on TAIKOR Primer 150, quartz sand and Top 425 enamel for warehouses, car parks, stands and footpaths; UV-resistant.
Impregnation of a concrete floor with TAIKOR Primer 210 for dustproofing and hardening; all-season application at temperatures from −10 to +35 °C.
Deep-penetrating primer for dustproofing and hardening concrete floors and under TAIKOR Elastic 300 waterproofing; application from −10 °C.
Antistatic polyurethane floor system with copper tape and TAIKOR Floor 720 AS for explosion-hazard production, electronics and filling stations; up to 10⁶ Ω.
