TN-POL TAIKOR Quartz is an economical thin-layer system: two coats of TAIKOR Primer 150 primer-enamel with a broadcast of calcined quartz sand and a finish of TAIKOR Top 425 polyurethane enamel. The coating is wear-resistant and UV-resistant, designed for pedestrians and rubber-tyred vehicles — for warehouses, car parks, stadium stands and footpaths. With the winter enamel, work is possible at sub-zero temperatures; service from −60 to +110 °C. The layer follows the relief of the substrate, so it is not recommended for interiors with high decorative requirements.
| Manufacturer | TAIKOR (TECHNONICOL) — OOO “TECHNONICOL – Construction Systems” |
|---|---|
| Type | floor material |
| Use | warehouses and logistics, car parks and ramps, wet premises, outdoor areas |
| Base | thin-layer wear-resistant UV-resistant floor: TAIKOR Primer 150 (2 coats) + quartz sand + TAIKOR Top 425 (1-2 coats) |
| Colour | finishing enamel tinted to RAL |
| Application method | substrate: compressive strength at least 15 MPa, pull-off at least 1.5 MPa, moisture no more than 4 %; TAIKOR Primer 150 in two coats (spraying/roller/brush), the second coat is broadcast with calcined quartz sand (fractions 0.2 mm, 0.5 mm, 0.1-0.63 mm); after curing, removal of loose sand; finish TAIKOR Top 425 in 1-2 coats to a slight gloss; work at sub-zero temperatures possible (winter Top 425) |
| Application temperature | by material: Primer 150 -10…+35 °C; Top 425 summer +5…+35 °C, winter -10…+10 °C |
| Curing | second coat of enamel not earlier than after 2 h at 20 °C |
| Key properties | Service temperature -60…+110 °C; RP1; V1; D2; T2; non-sparking — yes; wear resistance, UV resistance; for light and moderate loads (pedestrian, rubber-tyred vehicles) |
| Layer thickness | 0.8-1.0 mm (depends on the sand fraction) |
| Consumption | TAIKOR Top 425 0.150-0.300 + 0.200-0.400 kg/m2; quartz sand 2.0 kg/m2; TAIKOR Primer 150 adhesive coat 0.300 + priming coat 0.185 kg/m2 |
| Standards | GOST R 51032, GOST 30402, GOST 12.1.044, STO 004-02495342 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Epoxy self-levelling compound for floors in workshops, warehouses, car parks, medical, food and children's facilities; abrasion to ASTM D 4060 up to 49 mg.
Deep-penetrating primer for dustproofing and hardening concrete floors and under TAIKOR Elastic 300 waterproofing; application from −10 °C.
Polyurethane self-levelling floor system based on TAIKOR Primer 160 and Floor 720 for offices, medicine, schools, warehouses and open car parks.
Epoxy primer without a strong odour for TAIKOR Floor self-levelling floors and a binder for repair compounds; adhesion to concrete from 2 MPa.
Antistatic polyurethane self-levelling floor for explosion-hazard production, electronics, laboratories, car services and filling stations; no more than 10⁶ Ω.
Epoxy self-levelling floor system based on TAIKOR Primer 160 and Floor 710 for sales floors, medicine, schools, car parks, warehouses and food workshops.
