Top 425 finishing enamel is a two-component polyurethane resistant to light, weather and ultraviolet. It is used to finish thin-layer floors over TAIKOR Primer 150 — smooth or filled with quartz sand — in car parks, warehouses, cold stores, production premises, hospitals and stadium stands. The summer version is applied at +5…+35 °C, the winter version at −10…+10 °C. The coating withstands 72 hours each of exposure to water, 10% NaOH, 3% NaCl, petrol and xylene; light load after 48 hours.
| Manufacturer | TAIKOR (TECHNONICOL) — OOO “TECHNONICOL – Construction Systems” |
|---|---|
| Type | varnishes and finishing coats |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public, outdoor areas, chemically resistant |
| Base | two-component light- and weather-resistant polyurethane enamel; non-volatiles at least 59 % |
| Colour | RAL colour, gloss, semi-gloss |
| Packaging | pails 20 and 3 l; net weight 20 and 1.4 kg (component A 20 kg, hardener B 1.4 kg) |
| Application method | finish over primed steel or concrete (TAIKOR Primer 150 primer); thin-layer floors, smooth or filled with quartz sand; spraying, roller, brush; A:B = 100:7 by weight; two versions — summer and winter |
| Application temperature | summer +5…+35 °C; winter -10…+10 °C; relative humidity no more than 80 % |
| Curing | drying to degree 3 at (20±2) °C no more than 2 h; interval between coats at least 2 h; light load at least 48 h; full cure 7 days; pot life at least 1.5 h |
| Key properties | Adhesion to concrete at least 2 MPa (GOST 32299); adhesion to steel no more than 1 point; film impact strength at least 50 cm; flexural elasticity no more than 1 mm; long-term service temperature -60…+110 °C; resistance to static exposure to water, 10 % NaOH, 3 % NaCl, 3 % H2SO4, petrol, xylene — at least 72 h each; UV-resistant; in the Quartz/Decor systems: RP1, V1, D2, T2, non-sparking — yes |
| Layer thickness | at least 60 µm (one coat on metal); in the TN-POL TAIKOR Quartz system total coating thickness 0.8-1.0 mm |
| Consumption | 0.170 kg/m2 per coat on metal (theoretical); on floors: Quartz 0.150-0.300 + 0.200-0.400 kg/m2, Decor 0.170 + 0.170 kg/m2 |
| Shelf life | 24 months; storage and transport -40…+40 °C |
| Standards | TU 2312-100-72746455-2016; TN VED EAEU 3208 20 9009 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Epoxy primer without a strong odour for TAIKOR Floor self-levelling floors and a binder for repair compounds; adhesion to concrete from 2 MPa.
Deep-penetrating primer for dustproofing and hardening concrete floors and under TAIKOR Elastic 300 waterproofing; application from −10 °C.
Epoxy self-levelling floor system based on TAIKOR Primer 160 and Floor 710 for sales floors, medicine, schools, car parks, warehouses and food workshops.
Polyurethane self-levelling floor system based on TAIKOR Primer 160 and Floor 720 for offices, medicine, schools, warehouses and open car parks.
Economical thin-layer floor based on TAIKOR Primer 150, quartz sand and Top 425 enamel for warehouses, car parks, stands and footpaths; UV-resistant.
Epoxy self-levelling compound for floors in workshops, warehouses, car parks, medical, food and children's facilities; abrasion to ASTM D 4060 up to 49 mg.
