Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
ECOBASE V-UV PVC waterproofing membrane — UV-resistant
TECHNONICOL

ECOBASE V-UV PVC waterproofing membrane — UV-resistant

Roll materials and membranes

ECOBASE V-UV is made of plasticised PVC with UV stabilisation and withstands UV radiation both during installation and in service. It is used for foundations, stylobates, inverted roofs, tunnels and metro stations, floors on grade, and for anti-seepage liners of ponds, sludge ponds, canals, dykes and dams. The membrane can be installed at sub-zero temperatures and on a damp substrate without drying, and the seams are tested for leak-tightness. It is resistant to aggressive solutions, biological attack and roots, and is watertight at 1 MPa for 24 h.

Specifications

ManufacturerTECHNONICOL — OOO “Zavod Logicroof”, Ryazan
Typeroll materials and membranes
Usefoundations and basements, tunnels and metro, tanks and pools, hydraulic structures and dams, roofs
Baseunreinforced polymer membrane based on plasticised PVC (extrusion, fillers, process additives), UV-stabilised; signal layer
Colourboth sides grey, or one of them black
Packagingrolls 20 m × 2.15 m, each in opaque polyethylene film, on wooden pallets
Application methodwaterproofing of foundations, stylobates, trafficked inverted roofs, underground structures, tunnels, metro stations and pedestrian underpasses; anti-seepage liners for ponds, tailings and sludge ponds, manure storage facilities, land reclamation canals, dykes, dams, lagoons, tanks; floors on grade; installation at sub-zero temperatures and on a damp substrate without drying; seams are tested for leak-tightness; used in accordance with SP 45.13330, SP 72.13330.2016, SP 71.13330.2017, SP 28.13330.2017, STO 72746455-4.2.2-2016
Key propertiesnominal tensile strength (method B) lengthwise at least 12 MPa, crosswise at least 10 MPa (GOST 31899-2-2011); elongation at maximum load at least 200%; flexibility on a bar R = 5 mm not more than −40 °C (GOST 2678-94); watertightness at 1 MPa for 24 h — absolute (GOST EN 1928-2011, B); nail-shank tear resistance at least 150 N; change in linear dimensions at 80 °C over 6 h not more than 2%; static puncture resistance at least 20 kg; welded seam peel strength at least 300 N/50 mm, tensile strength at least 600 N/50 mm; impact resistance on a hard substrate at least 700; 1400 mm, on a soft substrate at least 1000; 1800 mm; water absorption not more than 0.2%; resistance to UV radiation during installation and service, to aggressive solutions, biological attack and roots
Layer thickness1.2; 1.5; 2.0; 3.0 mm (up to 6 mm can be produced)
Shelf life12 months from the date of manufacture; store rolls horizontally on a pallet, not more than 3 high, in the factory packaging, in a dry enclosed room or under a canopy
StandardsSTO 72746455-3.4.3-2015; GOST 30547

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by TECHNONICOL