SNEZH-PRO 116MU — alkyd-modified primer-enamel for metal, concrete and wood
Matt or semi-matt primer-enamel for cranes, machine tools, power line towers and road machinery, applied over St 2 and old coatings.

The solvent-free two-component polyurethane (polyisocyanate and a polyol base in a 1 : 1 ratio by volume) is sprayed with units with separate feed and heating of the components, in one coat “wet-on-wet”. MASTIKOR protects pipeline fittings, shut-off valves, underground tanks and vessels, pipes laid underground and underwater, and over the SK-BETON primer it serves as waterproofing for concrete and reinforced concrete. The coating works from −50 to +80 °C, adhesion to steel is at least 7.0 MPa, and the material is included in the OVP register of PJSC Transneft.
| Manufacturer | Snezhinskie Kraski — OOO “ZLKS”, Yekaterinburg |
|---|---|
| Type | anticorrosive material |
| Base | two-component solvent-free thermosetting polyurethane: component A — polyisocyanate, component B — polyol base |
| Colour | from burgundy to black (shade not standardised) |
| Application method | units with separate feed of the components and heating to 70–80 °C, pressure 14–20 MPa; spraying “wet-on-wet” in one coat |
| Application temperature | from +5 to +40 °C; relative humidity max. 80 %; steel 3 °C above the dew point |
| Drying | tack-free max. 9 min at 20 °C; recoating no later than 24 h; full cure before service 72 h at +20 °C (96 h at +5 °C, 56 h at +40 °C) |
| Key properties | Volume ratio of components: 1 : 1, Adhesion to steel by the pull-off method: at least 7.0 MPa, Service temperature: from −50 to +80 °C |
| Compatible materials | on concrete — with the penetrating primer SK-BETON; repair — MASTIKOR REM |
| Shelf life | 24 months from the date of manufacture; storage from −40 to +40 °C |
| Standards | TU 20.30.12-035-51472338-2021; STO-01393674-008-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Matt or semi-matt primer-enamel for cranes, machine tools, power line towers and road machinery, applied over St 2 and old coatings.
Matt acrylic primer-enamel for metal, concrete and reinforced concrete indoors and outdoors, coating service life 10 years.
Epoxy-polyamide zinc-rich primer for bridges, tanks and marine structures, withstands +150 °C in a dry environment.
Polyurethane zinc-rich primer for bridges, tanks and marine structures, at least 80 % zinc in the coating, applied from −15 °C.
Polyurethane primer for tanks, pipelines and steel structures; in a system with SK-PUR enamel — categories C3–C5 for 20 years.
Clear polyurethane impregnation for the concrete of bridges, tunnels and floors, applied from −20 to +50 °C at concrete moisture up to 12 %.