Snezhinskie Kraski
SNEZH-PRO 111MU — alkyd-urethane enamel for wagons and transport structures
Gloss or semi-gloss alkyd-urethane RAL enamel for rolling stock; in a system with the 011M primer it lasts 8 years.
Price on request
Snezhinskie Kraski
SK-BETON — penetrating polyurethane primer for impregnating and strengthening concrete
The penetrating primer based on an isocyanate prepolymer impregnates and strengthens concrete and reinforced concrete, including that of bridges, tunnels and supports, and also dustproofs concrete floors. It is applied until a gloss appears, at temperatures from −20 to +50 °C and concrete moisture of max. 12 %, on a substrate at least 28 days old. SK-BETON prepares the surface for SK-AKRIL OPTIMA, SK-EPOKSID-MIO, the SK-PROTEKT enamel and for MASTIKOR for waterproofing; the system with SK-EPOKSID-MIO and SK-PROTEKT raises the water impermeability grade of the concrete by three steps.
Specifications
| Manufacturer | Snezhinskie Kraski — OOO “ZLKS”, Yekaterinburg |
|---|---|
| Type | anticorrosive material |
| Use | concrete, bridges |
| Base | one-component polyurethane: isocyanate prepolymer in organic solvents |
| Colour | clear solution from light brown to brown |
| Application method | airless and air spray, roller, brush; apply until a gloss appears (until absorption ends); solvent “SK-PUR” up to 5 % / 20 % |
| Application temperature | from −20 to +50 °C; relative humidity up to 98 %; substrate 3 °C above the dew point; concrete moisture max. 12 % by weight |
| Drying | dust-free max. 5 h, tack-free max. 6 h at 20 °C; next coat after drying to degree 3, no later than 7 days; full cure 3 days at (20±5) °C |
| Compatible materials | under SK-AKRIL OPTIMA, SK-EPOKSID-MIO or SK-PROTEKT enamel; under MASTIKOR for waterproofing |
| Shelf life | 12 months from the date of manufacture; storage not above +40 °C in the manufacturer’s sealed containers |
| Standards | TU 20.30.12-049-51472338-2017; STO-01393674-008-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Snezhinskie Kraski
Snezhinskie Kraski
SK-EPOKSID-MIO — epoxy primer-enamel with micaceous iron oxide and zinc phosphate
Epoxy primer-enamel with micaceous iron oxide for tanks, bridges and equipment, works as a stand-alone, intermediate or primer coat.
Price on request
Snezhinskie Kraski
SK-EPOKSID-TS — two-component zinc-rich epoxy primer
Epoxy-polyamide zinc-rich primer for bridges, tanks and marine structures, withstands +150 °C in a dry environment.
Price on request
Snezhinskie Kraski
SNEZH-PRO 011M — alkyd-modified primer for rolling stock
Alkyd-modified primer for wagon bodies, transport structures and cranes, dries to degree 3 from 1.5 h at 20 °C.
Price on request
Snezhinskie Kraski
SNEZH-PRO 116MU — alkyd-modified primer-enamel for metal, concrete and wood
Matt or semi-matt primer-enamel for cranes, machine tools, power line towers and road machinery, applied over St 2 and old coatings.
Price on request
Snezhinskie Kraski
SK-REZERV — epoxy coating for the inner surface of oil tanks
Epoxy compound for internal protection of tanks with crude oil, fuel oil, oils and water, resistant to the stored product up to +90 °C.
Price on request