Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
SK-EPOKSID-MIO — epoxy primer-enamel with micaceous iron oxide and zinc phosphate
Snezhinskie Kraski

SK-EPOKSID-MIO — epoxy primer-enamel with micaceous iron oxide and zinc phosphate

Primer-enamels

This epoxy-polyamide primer-enamel contains micaceous iron oxide and zinc phosphate, and its role in a system depends on the scheme: stand-alone coating, intermediate coat over SK-EPOKSID-TS, primer under the SK-PROTEKT and SK-MET enamels or under the ANTIPLAM-K fire protection. It is used on the outer and inner surfaces of tanks and vessels, process equipment, bridges, marine structures, and on concrete together with SK-BETON. The SK-EPOKSID-MIO + SK-MET system meets categories C5-I and C5-M per ISO 12944, and the material is included in the regulations of PJSC Uralkali.

Specifications

ManufacturerSnezhinskie Kraski — OOO “ZLKS”, Yekaterinburg
Typeprimer-enamels
Usesteel structures, bridges, tanks, oil and gas, equipment, chemical plants, marine and port structures, concrete
Basetwo-component epoxy-polyamide; contains micaceous iron oxide and zinc phosphate
Colourgrey or red-brown (shade not standardised); other colours by agreement
Application methodairless spray (nozzle 0.33–0.53 mm, 16–45 MPa); air spray (nozzle 1.9–3.0 mm, 0.20–0.45 MPa); roller; brush; solvent “SK-REZERV 1” up to 10 % / 20 %; 1–2 coats
Application temperaturefrom −10 to +40 °C (from +5 to +40 °C recommended); relative humidity max. 80 %; surface 3 °C above the dew point
Dryingpot life at least 2 h; dust-free max. 1.5 h, tack-free max. 2 h at 20 °C; minimum recoat interval 3 h at +20 °C (72 h at −10 °C, 2 h at +40 °C); maximum interval up to 3 months; full cure 7 days; hot drying permitted
Compatible materialson its own; intermediate coat over zinc-rich primers (SK-EPOKSID-TS); primer under polyurethane or acrylic enamels (SK-PROTEKT, SK-MET); primer under fire protection (ANTIPLAM-K); on concrete with SK-BETON
Shelf life24 months from the date of manufacture; storage from −40 to +40 °C in the manufacturer’s sealed containers
StandardsTU 20.30.12-051-51472338-2017; STO-01393674-007-2022

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by Snezhinskie Kraski