Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
LEVELINE SPu 2k — matt polyurethane varnish for polymer floors
INDASTRO

LEVELINE SPu 2k — matt polyurethane varnish for polymer floors

Sealers and topcoats

The matt two-component SPu 2k varnish finishes epoxy and polyurethane floors and seals decorative chips and flakes. The coating is lightfast and UV-resistant, with a gloss level of 7–9%. The varnish is applied by roller, brush or spray at temperatures from +5 to +20 °C; foot traffic is allowed after 2 days, full mechanical load after 5 and chemical load after 10 days. Suitable for decorative coatings in retail and public interiors.

Specifications

ManufacturerINDASTRO — OOO “Sedrus”
Typevarnishes and finishing coats
Usedecorative, retail and public
Basetwo-component polyurethane varnish, matt (gloss 7-9%)
Colourmatt clear
Packaging16 kg kit: component A — 14 kg steel pail; component B — 2 kg plastic canister
Application methodroller (4-6 mm pile), brush, airless (nozzle 0.011–0.013″) or air spray; 2 coats; over epoxy/polyurethane floors, sealing of chips/flakes
Application temperaturesurface and air +5…+20 °C; material +15…+20 °C; humidity no more than 80%; 3 °C above the dew point
Curingfirst coat drying 12-16 h (no more than 24 h); foot traffic after 2 days; full mechanical — 5 days; full chemical — 10 days
Key propertiesGloss level 7-9%; lightfast and UV-resistant; wear-resistant; pot life at 15-20 °C at least 4 h
Consumption50-80 g/m2 per coat, 2 coats
Shelf life6 months at 0…+25 °C

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by INDASTRO