FE851 AS is the conductive layer of an antistatic system: the black epoxy primer with a conductive additive is applied over a levelled, primed epoxy surface before the finishing coat. The electrical resistance of the layer is 10³–10⁵ Ω, adhesion to concrete is at least 2.5 MPa, and the fire hazard class is KM2. It is used at electronics, aviation, chemical and oil-refining facilities, in medicine, cleanrooms, data centres and laboratories.
| Manufacturer | INDASTRO — OOO “Sedrus” |
|---|---|
| Type | floor primers |
| Use | antistatic/conductive |
| Base | epoxy resin with conductive additive + phenalkamine hardener; 100% solids |
| Colour | black |
| Packaging | 24 kg kit: component A — 16 kg metal pail; component B — 8 kg plastic canister |
| Application method | conductive layer of antistatic polymer floors, over a levelled primed epoxy surface; A:B = 2:1 |
| Application temperature | air and substrate +5…+30 °C; material +15…+25 °C |
| Curing | foot traffic after 3 days; full mechanical load after 7 days; drying at +20 °C — 24 hours; next coat after 24–72 h |
| Key properties | Electrical resistance 10^3-10^5 Ω; adhesion to concrete at least 2.5 MPa; fire hazard class KM2; pot life at +20 °C — 30 min |
| Consumption | 80-100 g/m2 (approximate) |
| Shelf life | 12 months; storage +5…+30 °C |
| Standards | manufacturer's TU; KM2; SP 29.13330.2011 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Winter version of the thixotropic R4 mortar for repairing B30–B40 concrete at temperatures from −10 to +10 °C; compressive strength at 28 days from 45 MPa.
Clear polyurethane sealer for curing freshly laid concrete and toppings in workshops and warehouses; dries in 2 hours at +20 °C.
Thixotropic R4 mortar for repairing B30–B40 concrete and reinforced concrete structures, including walls and ceilings; compressive strength at 28 days from 45 MPa.
Cement self-levelling floor for workshops, warehouses and public buildings, and a base for polymer coatings; walkable after 3 hours.
Cementitious grout for installing equipment, columns, joints and anchors at low temperatures; 10 MPa after 6 hours at −10 °C, 50 MPa at 28 days.
Thixotropic R4 mortar for repairing high-strength concrete and reinforced concrete of B50 and above; 70 MPa at 28 days, water impermeability W20.
