LEVL (INGRI)
LEVL CemPol 100 SL — non-sparking pourable concrete coating
Pourable non-sparking floor on Portland cement with marble aggregate for explosion-hazard production and storage premises; strength 45 MPa.
Price on request
LEVL (INGRI)
LEVL Top Corund — corundum topping for heavily loaded floors
LEVL Top Corund, a dry mix of cement with graded corundum and quartz sand, is intended for floors under very significant mechanical loads. It is worked into fresh concrete of grade M300 or higher, after which the surface is treated with LEVL Cure 100 curing compound. After 28 days compressive strength reaches 90 MPa, abrasion (wear) does not exceed 0.35 g/cm², and service is permitted from −40 to +60 °C. Colours: natural grey, green, red, light grey and dark grey.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | dry-shake toppings |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public buildings |
| Base | cement, graded corundum and quartz sand fillers, functional additives |
| Colour | natural (grey); coloured: green, red, light grey, dark grey |
| Packaging | 25 kg bag with inner polyethylene liner |
| Application method | dry-shake application onto freshly placed concrete (spreader cart or by hand) as 2/3 + 1/3 of the consumption, floating and polishing with a power trowel; then LEVL Cure 100 (0.10–0.15 kg/m²); joints: Vilaterm backer rod + LEVL Flex PU40; concrete at least M300 (B22.5), without air-entraining admixtures |
| Application temperature | air and substrate +5…+30 °C; air humidity at least 50% |
| Curing | foot traffic: +10 °C ~18 hours, +20 °C ~12 hours, +25 °C ~8 hours; full strength gain: ~10 / ~7 / ~5 days |
| Key properties | Compressive strength (28 days) at least 90 MPa; abrasion (wear) no more than 0.35 g/cm²; mortar density at least 2300 kg/m³; mechanical loads: very significant; environment: non-aggressive and slightly aggressive; liquids: high; service temperature from minus 40 °C to +60 °C (short-term up to +100 °C) |
| Layer thickness | 2–5 mm |
| Consumption | 3–8 kg/m²; natural: significant loads 3...5, very significant loads 5...8 kg/m²; coloured: 5...6 / 6...8 kg/m² |
| Shelf life | 12 months; storage at +5...+30 °C |
| Standards | TU 23.64.10-062-94613022-2018; GOST 310.4, GOST 13087; SP 29.13330.2011 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL PoliCem PU 013 — smooth polyurethane-cement floor coating
Matt polyurethane-cement floor for dairy, brewing and meat production, pharmaceuticals and chemicals; compressive strength 55 MPa.
Price on request
LEVL (INGRI)
LEVL Self 12 — self-levelling underlayment for industrial coatings
Cementitious levelling compound for levelling concrete before laying polymer and cementitious floors; subsequent layers after 2–3 days.
Price on request
LEVL (INGRI)
LEVL CemPol 50 “terrazzo” — cement mix for polished terrazzo floors
Base for a decorative ground terrazzo floor in retail and public buildings; the colour is set by the aggregate, strength 45 MPa at 28 days.
Price on request
LEVL (INGRI)
LEVL CemPol 30 — low-shrinkage cement screed and industrial floor
Mortar mix for a finishing cementitious floor or a base under self-levelling coatings; compressive strength 40 MPa, non-combustible (NG, KM-0).
Price on request
LEVL (INGRI)
LEVL PoliCem PU 013 ER — antistatic polyurethane-cement floor
Conductive PU-cement coating with 10⁴–10⁶ ohm resistance for chemical plants, hangars, electronics and battery rooms.
Price on request