LEVL (INGRI)
LEVL CemPol 30 — low-shrinkage cement screed and industrial floor
Mortar mix for a finishing cementitious floor or a base under self-levelling coatings; compressive strength 40 MPa, non-combustible (NG, KM-0).
Price on request
LEVL (INGRI)
LEVL PoliCem PU 013 — smooth polyurethane-cement floor coating
Dairies, breweries, meat processing, livestock farming, pharmaceutical and chemical plants are typical sites for LEVL PoliCem PU 013. The three-component polyurethane-cement gives a smooth matt coating, or a textured one when broadcast with quartz sand and sealed with PoliCem PU 015. Compressive strength is at least 55 MPa, flexural 15 MPa, bond to concrete 2.0 MPa; the coating withstands −40 to +90 °C and hot-water cleaning. Colours: silver grey, beige, green, dark grey, red-brown.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | polyurethane-cement (PU-cement) floors |
| Use | food and pharmaceutical, chemically resistant, production workshops, warehouses and logistics, wet rooms |
| Base | three-component: modified polyurethane, cement, aggregate |
| Colour | silver grey, beige, green, dark grey, red-brown (smooth matt) |
| Packaging | 34.5 kg kit: A — metal pail 4.3 kg; B — plastic jerrycan 5.2 kg; C — paper bag 25 kg; A : B : C = 1.00 : 1.21 : 5.81 |
| Application method | over PoliCem PU 05 primer: gauge rake + spiked roller (smooth, 4–6 mm) or with a quartz sand broadcast and a PoliCem PU 015 seal coat (textured, 6 mm) |
| Application temperature | air and substrate +10…+30 °C (recommended +17…+23 °C); air humidity 40–80 %; substrate moisture no more than 6 % |
| Curing | pot life at +20 °C 17 min; light loads / recoat interval, foot traffic, full strength gain: +10 °C ~72 h / ~6 days / ~10 days; +20 °C ~48 h / ~3 days / ~7 days; +30 °C ~24 h / ~2 days / ~5 days |
| Key properties | Compressive strength at 28 days at least 55 MPa; flexural at least 15 MPa; bond to concrete at least 2.0 MPa; Taber abrasion (H22/1000 g/1000 rev.) no more than 1000 mg; service temperature from −40 °C to +90 °C, hot-water cleaning; chemical resistance: on request |
| Layer thickness | from 4 to 6 mm |
| Consumption | 1.95 kg/m² per 1 mm (theoretical); 7.8–11.7 kg/m² for 4–6 mm |
| Shelf life | 6 months; storage at +5…+25 °C |
| Standards | TU 20.30.22-087-94613022-2021; GOST 5802, GOST 310.4, GOST R 58277 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 108 — filled epoxy primer for polymer floors
Epoxy primer with mineral filler under all LEVL epoxy and polyurethane floors; gives a textured surface without a sand broadcast.
Price on request
LEVL (INGRI)
LEVL RemTop — compound for local repair of topping floors
Polymer-cement primer and gauging agent for repairing hardened floors with LEVL Top mixes; bond to substrate at least 1.5 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 102W — epoxy primer for damp and young concrete
Water-based solvent-free epoxy primer for concrete with moisture up to 10 % and age from 7 days; temporary moisture barrier under polymer floors.
Price on request
LEVL (INGRI)
LEVL Base 200 — acrylic primer under levelling compounds and cementitious floors
Aqueous acrylic dispersion for priming concrete before LEVL Self and CemPol: reduces substrate water absorption and improves adhesion.
Price on request
LEVL (INGRI)
LEVL Coat 308 — economical filled epoxy self-levelling floor
Epoxy compound used only with quartz sand, for warehouses, workshops, car parks and wet rooms; compressive strength 55 MPa.
Price on request