Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
LEVL Coat 102W — epoxy primer for damp and young concrete
LEVL (INGRI)

LEVL Coat 102W — epoxy primer for damp and young concrete

Floor primers

LEVL Coat 102W primer makes it possible to lay a polymer floor on damp or fresh concrete: it works on substrates with moisture up to 10 % by weight and on “young” concrete from 7 days. The water-based epoxy compound without organic solvents serves as a temporary moisture barrier under epoxy and polyurethane coatings, is vapour-permeable and odourless. It is applied with a velour roller, flat trowel or brush in two or more coats; tools are washed with water. Adhesion to concrete is at least 2 MPa, service from −10 to +60 °C.

Specifications

ManufacturerLEVL (INGRI) — OOO “Ingri”, Saint Petersburg
Typefloor primers
Basebisphenol A epoxy resin + water-emulsified amine hardener with mineral filler; no organic solvents
Colourconcrete look with a semi-transparent milky film
Packagingkits of 1.0 kg and 10 kg (A and B in two containers); A : B = 7.3 : 1 (by weight)
Application methodpriming of damp or fresh concrete substrates (“young” concrete from 7 days), temporary moisture barrier under epoxy and polyurethane coatings; velour roller, flat trowel, brush, 2 or more coats; tools are cleaned with water
Application temperatureair and substrate +10…+30 °C (recommended +10…+25 °C); material +15…+30 °C (recommended +17…+23 °C); air humidity no more than 80 %; substrate moisture no more than 10.0 % by weight; 3 °C above the dew point
Curingnext coat no earlier than 12 h and no later than 48 h at +20 ± 2 °C
Key propertiesDensity (A+B) 1.65 ± 0.1 g/cm³; non-volatile content at least 74 %; adhesion to concrete at least 2 MPa; vapour-permeable; odourless; pot life +10 °C ~50 min, +20 °C ~30 min, +30 °C ~15 min; service temperature from −10 °C to +60 °C (short-term up to +90 °C)
Consumption0.1–0.25 kg/m² per coat (2 coats recommended); in a cementitious substrate priming system 0.30 kg/m²
Shelf life6 months from the date of manufacture; storage at +5…+25 °C
StandardsTU 2316-003-94613022-06 with Amendment No. 1; not subject to mandatory fire safety certification (No. 123-FZ); test methods GOST 31992.1, GOST 31939, GOST 28574

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by LEVL (INGRI)