Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
LEVL Coat 101 Sleek — epoxy primer under LEVL self-levelling floors
LEVL (INGRI)

LEVL Coat 101 Sleek — epoxy primer under LEVL self-levelling floors

Floor primers

LEVL Coat 101 Sleek primer matches LEVL Coat 101 in its properties and differs in having an opaque white component A. It is used to prime concrete before LEVL epoxy and polyurethane floors, and with quartz sand it makes a filler and a highly filled compound for skirtings and coves; injection of voids in concrete is also possible. Adhesion to concrete is at least 2.5 MPa, non-volatile content at least 95 %, pot life at +20 °C about 30 minutes. Shelf life 18 months at +5…+25 °C.

Specifications

ManufacturerLEVL (INGRI) — OOO “Ingri”, Saint Petersburg
Typefloor primers
Baseepoxy resin; contains a small amount of organic solvent
Colourclear yellowish coating, “wet” concrete look (component A: opaque white liquid)
Packagingkits of 0.4; 1.0; 10; 20 kg; A : B = 1.92 : 1.00 (by weight)
Application methodpriming of mineral substrates under LEVL epoxy and polyurethane floors (with a flat trowel, crosswise, in 2 coats; filled 1:1 with quartz sand and broadcast); filler compound with quartz sand; highly filled compound for skirtings and coves; injection of voids in concrete and reinforced concrete
Application temperatureair and substrate +10…+30 °C (recommended +17…+23 °C); material +15…+30 °C; air humidity no more than 80 %; substrate moisture no more than 5 % by weight; substrate 3 °C above the dew point
Curingrecoat interval: +10 °C ~24 h, +23 °C ~12 h, +30 °C ~6 h (at +23 °C no more than 36 h); foot traffic: ~5 / ~3 / ~2 days; full strength gain: ~10 / ~7 / ~4 days
Key propertiesDensity 1.06 ± 0.05 g/cm³; non-volatile content by weight at least 95 %; adhesion to concrete at least 2.5 MPa; pot life +10 °C ~50 min, +20 °C ~30 min, +30 °C ~15 min; coating service temperature from −10 to +60 °C
Consumptionfiller: LEVL Coat 101 Sleek 0.5 kg/m² + quartz sand 0.1–0.3 mm 0.5–2.0 kg/m²; priming with filling and broadcast: 0.3 kg/m² + sand 0.3 kg/m² + broadcast 0.7 kg/m²; skirting 50×50 mm: primer 0.03 kg/lin. m, skirting 0.33 kg/lin. m (+ sand 2.4 and 1 kg/lin. m)
Shelf life18 months from the date of manufacture; storage at +5…+25 °C
StandardsTU 2312-001-94613022-2006; works per SP 29.13330.2011 and SP 71.13330.2017; test methods GOST 31992.1, GOST 31939, GOST 28574

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by LEVL (INGRI)