ZIVKON TE — TPO tape for expansion joints and cracks
Highly elastic thermoplastic polyolefin tape on epoxy adhesive for expansion joints, cold joints and moving cracks; elongation 600%.

LEVL CemPol 20 self-levelling mix hardens quickly: at +20 °C the floor can be walked on after just 2–4 hours, and within the first day compressive strength reaches 25 MPa. At 28 days the value is at least 50 MPa, flexural 10 MPa, abrasion up to 0.5 g/cm². It is laid by hand or by machine over LEVL Base 200 primer and rolled with a spiked roller. The material is non-combustible (NG, KM-0) and suits workshops, warehouses, car parks, retail and public buildings.
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | flooring material |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public buildings |
| Base | special cements, modifying additives (self-levelling rapid-hardening mix) |
| Colour | natural |
| Packaging | 25 kg bag with inner polyethylene liner; 3.75 kg of water per bag |
| Application method | self-levelling finishing floor over LEVL Base 200 primer (2 coats of 0.15 kg/m² each): squeegee + spiked roller; manual and machine application; LEVL Cure 100 |
| Application temperature | air and substrate +10…+25 °C; humidity at least 50%; 3 °C above the dew point |
| Curing | pot life at +20 °C at least 20 minutes; at +20 °C: foot traffic ~2–4 hours, light loads ~24 hours, full strength gain ~14–28 days |
| Key properties | Compressive strength at least 25 MPa (1 day) / 50 MPa (28 days); flexural 4 / 10 MPa; abrasion (wear) no more than 0.5 g/cm²; bond to substrate at least 2 MPa; impact: at least 5 kg from a height of 1 m; mechanical loads: significant; non-combustible (NG, KM-0); service temperature from −40 °C to +60 °C |
| Layer thickness | 10–30 mm |
| Consumption | theoretically 1.9 kg/m² per 1 mm of thickness; 19.0–57.0 kg/m² for 10–30 mm |
| Shelf life | 6 months |
| Standards | TU 5745-011-94613022-10 with Amendment No. 1; GOST 310.4, GOST 13087, GOST 31356, GOST 30353-95; fire safety certificate No. C-RU.PB 58.V.02644 (NG, KM-0); declaration ROSS RU D-RU.RA01.V.25307/19; SGR RU.77.01.34.008.E.000244.02.19 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Highly elastic thermoplastic polyolefin tape on epoxy adhesive for expansion joints, cold joints and moving cracks; elongation 600%.
Topping with quartz and corundum aggregate for workshops, warehouses and car parks under very significant loads; abrasion (wear) no more than 0.15 g/cm².
Pourable non-sparking floor on Portland cement with marble aggregate for explosion-hazard production and storage premises; strength 45 MPa.
Epoxy primer under LEVL floors with the best surface wetting in the range; also a filler, binder, injection compound and glass-mat adhesive.
Three-component clear compound for the finishing layer of a 3D floor over decorative PVC film; Taber abrasion up to 50 mg.
Epoxy primer for mineral substrates under epoxy and polyurethane floors, fillers and coves; adhesion to concrete at least 2.5 MPa.