LEVL (INGRI)
LEVL Coat 111 — epoxy impregnation for hardening concrete
Two-component epoxy impregnation for dustproofing and hardening porous mineral substrates; adhesion to concrete over 4.0 MPa.
Price on request
LEVL (INGRI)
LEVL CemPol 100 SL — non-sparking pourable concrete coating
LEVL CemPol 100 SL is intended for explosion-hazard rooms where the floor must be spark-proof. The dry mix of Portland cement with marble aggregate is supplemented on site with marble crushed stone, after which the concrete is spread with a shovel, rake or straightedge. After 28 days compressive strength is at least 45 MPa, flexural at least 8 MPa; at +20 °C foot traffic is permitted after about 15 hours. Marble crushed stone is not included and is purchased separately.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | flooring material |
| Use | production workshops, warehouses and logistics |
| Base | Portland cement, marble aggregate, modifying additives; 5–10 mm marble crushed stone is added on site |
| Colour | natural |
| Packaging | 25 kg bag with inner polyethylene liner; per bag 16–17 kg of marble crushed stone and 3.5–4.0 kg of water |
| Application method | non-sparking pourable concrete coating: spread with a shovel, rake or straightedge |
| Application temperature | air and substrate +5…+30 °C; humidity at least 50% |
| Curing | pot life at +20 °C 30 minutes; foot traffic: +10 °C ~1 day, +20 °C ~15 hours, +30 °C ~10 hours; light loads ~7 / ~4 / ~3 days; full strength gain ~28 / ~28 / ~14 days |
| Key properties | Non-sparking; compressive strength after 28 days at least 45 MPa; flexural at least 8 MPa; abrasion (wear) no more than 1.2 g/cm²; mechanical loads: significant; service temperature from −40 °C to +60 °C |
| Layer thickness | 25–100 mm (optimum from 35 mm) |
| Consumption | 32.9–131.7 kg/m² of dry mix + 5–10 mm marble crushed stone 22.1–88.2 kg/m² for 25–100 mm |
| Shelf life | 12 months |
| Standards | TU 23.64.10-073-94613022-2019; GOST 310.4, GOST 13087; SP 29.13330.2011 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 075 — MMA curing accelerator for winter work
Liquid accelerator for laying LEVL Coat 171, 271 and 573 carboacrylate floors at temperatures from 0 to −10 °C.
Price on request
LEVL (INGRI)
LEVL Coat 151 — polyurethane primer under polyurethane floors
One-component primer-impregnation for concrete and metal before LEVL polyurethane coatings; applied at temperatures from −10 °C.
Price on request
LEVL (INGRI)
LEVL CemPol 50 “terrazzo” — cement mix for polished terrazzo floors
Base for a decorative ground terrazzo floor in retail and public buildings; the colour is set by the aggregate, strength 45 MPa at 28 days.
Price on request
LEVL (INGRI)
LEVL Coat 352 — wear-resistant polyurethane floor for car parks and warehouses
Single-layer low-density PU self-levelling coating for car parks, car washes, warehouses and sales floors; service from −40 to +80 °C.
Price on request
LEVL (INGRI)
LEVL Coat 306 DA — decontaminable epoxy self-levelling floor
Smooth seamless epoxy coating for nuclear industry rooms subject to decontamination; Shore D hardness at least 70.
Price on request