LEVL (INGRI)
LEVL PoliCem PU 017 — thin-layer polyurethane-cement coating
PU-cement floor for food workshops and laboratories with moderate abrasive and chemical loads; service up to +90 °C.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 013 — smooth polyurethane-cement floor coating
Dairies, breweries, meat processing, livestock farming, pharmaceutical and chemical plants are typical sites for LEVL PoliCem PU 013. The three-component polyurethane-cement gives a smooth matt coating, or a textured one when broadcast with quartz sand and sealed with PoliCem PU 015. Compressive strength is at least 55 MPa, flexural 15 MPa, bond to concrete 2.0 MPa; the coating withstands −40 to +90 °C and hot-water cleaning. Colours: silver grey, beige, green, dark grey, red-brown.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | polyurethane-cement (PU-cement) floors |
| Use | food and pharmaceutical, chemically resistant, production workshops, warehouses and logistics, wet rooms |
| Base | three-component: modified polyurethane, cement, aggregate |
| Colour | silver grey, beige, green, dark grey, red-brown (smooth matt) |
| Packaging | 34.5 kg kit: A — metal pail 4.3 kg; B — plastic jerrycan 5.2 kg; C — paper bag 25 kg; A : B : C = 1.00 : 1.21 : 5.81 |
| Application method | over PoliCem PU 05 primer: gauge rake + spiked roller (smooth, 4–6 mm) or with a quartz sand broadcast and a PoliCem PU 015 seal coat (textured, 6 mm) |
| Application temperature | air and substrate +10…+30 °C (recommended +17…+23 °C); air humidity 40–80 %; substrate moisture no more than 6 % |
| Curing | pot life at +20 °C 17 min; light loads / recoat interval, foot traffic, full strength gain: +10 °C ~72 h / ~6 days / ~10 days; +20 °C ~48 h / ~3 days / ~7 days; +30 °C ~24 h / ~2 days / ~5 days |
| Key properties | Compressive strength at 28 days at least 55 MPa; flexural at least 15 MPa; bond to concrete at least 2.0 MPa; Taber abrasion (H22/1000 g/1000 rev.) no more than 1000 mg; service temperature from −40 °C to +90 °C, hot-water cleaning; chemical resistance: on request |
| Layer thickness | from 4 to 6 mm |
| Consumption | 1.95 kg/m² per 1 mm (theoretical); 7.8–11.7 kg/m² for 4–6 mm |
| Shelf life | 6 months; storage at +5…+25 °C |
| Standards | TU 20.30.22-087-94613022-2021; GOST 5802, GOST 310.4, GOST R 58277 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 221 AR — acrylic paint for outdoor concrete
Self-priming acrylic RAL coating for concrete and metal exposed to precipitation and UV; applied at temperatures from −20 °C.
Price on request
LEVL (INGRI)
LEVL Coat 352 — wear-resistant polyurethane floor for car parks and warehouses
Single-layer low-density PU self-levelling coating for car parks, car washes, warehouses and sales floors; service from −40 to +80 °C.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 013 ER SL — antistatic non-sparking PU-cement floor
Antistatic and non-sparking PU-cement coating for the aviation, electronics, oil refining and chemical industries; 10⁴–10⁶ ohm.
Price on request
LEVL (INGRI)
LEVL Coat 304 RAPID — fast-curing epoxy self-levelling floor
Coloured epoxy self-levelling floor for warehouses, workshops and car parks that takes full load after about 12 hours at +20 °C.
Price on request
LEVL (INGRI)
ZIVKON CR 7101 — chemical-resistant epoxy coating for floors and structures
Two-component epoxy paint for floors, walls and steel structures at plants with chemical exposure; service from −40 to +80 °C.
Price on request