LEVL (INGRI)
LEVL Coat 218 — high-gloss epoxy primer-enamel for floors
Thin-layer RAL paint coating for food, pharmaceutical and storage premises and car parks; service from −25 to +60 °C.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 013 ER SL — antistatic non-sparking PU-cement floor
LEVL PoliCem PU 013 ER SL combines two protective properties at once: antistatic and non-sparking. The system is built on PoliCem PU 05 primer with a copper earthing circuit, after which the main layer is spread with a gauge rake and rolled with a spiked roller. Electrical resistance is 10⁴–10⁶ ohm, compressive strength at least 55 MPa, flexural 15 MPa, operating range from −40 to +90 °C. The coating is in demand in the automotive, aviation and space industries, electronics, oil refining, chemicals and pharmaceuticals; copper tape is purchased separately.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | polyurethane-cement (PU-cement) floors |
| Use | antistatic/conductive, chemically resistant, production workshops, food and pharmaceutical |
| Base | three-component: modified polyurethane, cement, aggregate |
| Colour | light grey, dark grey |
| Packaging | 19.5 kg kit: A — metal pail 4.3 kg; B — metal pail 5.2 kg; C — paper bag 10 kg; A : B : C = 1.00 : 1.21 : 2.33 |
| Application method | antistatic non-sparking coating: PoliCem PU 05 primer, copper circuit (~1 lin. m/m², spacing 2.5 m, at least 2 earthing connections), main layer by gauge rake + spiked roller |
| Application temperature | air and substrate +10…+30 °C (recommended +17…+23 °C); air humidity 40–80 %; substrate moisture no more than 6 % |
| Curing | pot life at +20 °C 17 min; light loads / recoat interval, foot traffic, full strength gain: +10 °C ~72 h / ~6 days / ~10 days; +20 °C ~24 h / ~3 days / ~7 days; +30 °C ~20 h / ~2 days / ~5 days |
| Key properties | Electrical resistance 10^4–10^6 ohm; non-sparking; compressive strength at 28 days at least 55 MPa; flexural at least 15 MPa; bond at least 2.0 MPa; Taber abrasion no more than 1000 mg; service temperature from −40 °C to +90 °C |
| Layer thickness | from 2 to 4 mm |
| Consumption | 1.7 kg/m² per 1 mm (theoretical); 3.4–6.8 kg/m² for 2–4 mm |
| Shelf life | 6 months; storage at +5…+25 °C |
| Standards | TU 20.30.22-087-94613022-2021; GOST R 53734.4.1, GOST 310.4, GOST R 58277 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Coat 154 Rapid — fast-drying polyurethane primer
One-component primer-impregnation for concrete and metal under polyurethane floors; next coat at +20 °C after just 3 hours.
Price on request
LEVL (INGRI)
LEVL Coat 573 — main layer of a methyl methacrylate floor with coloured sand
Highly filled carboacrylate coating for workshops, car parks, food and wet rooms; full strength gain in about one day at +20 °C.
Price on request
LEVL (INGRI)
LEVL Coat 251 — matt polyurethane enamel for floors and walls
One-component RAL paint coating for workshops, warehouses, car parks and public buildings; applied at temperatures from −10 °C.
Price on request
LEVL (INGRI)
LEVL Coat 303 — epoxy self-levelling floor, smooth and textured
The range's main epoxy self-levelling floor for warehouses, workshops, car parks, healthcare and food production; compressive strength 63 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 151 — polyurethane primer under polyurethane floors
One-component primer-impregnation for concrete and metal before LEVL polyurethane coatings; applied at temperatures from −10 °C.
Price on request