Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
LEVL Coat 251 — matt polyurethane enamel for floors and walls
LEVL (INGRI)

LEVL Coat 251 — matt polyurethane enamel for floors and walls

Polyurethane floors

LEVL Coat 251 matt one-component enamel cures with air moisture and is tinted to the RAL chart. It is a thin-layer protective and decorative coating for floors and walls: it does not level the substrate but bridges fine cracks. The enamel can be applied at air and substrate temperatures from −10 °C, so it suits covered unheated premises and car parks; it is applied by roller or brush over LEVL Coat 151 primer. Taber abrasion is no more than 50 mg, service from −25 to +60 °C.

Specifications

ManufacturerLEVL (INGRI) — OOO “Ingri”, Saint Petersburg
Typepolyurethane floors
Useproduction workshops, warehouses and logistics, car parks and ramps, retail and public buildings, food and pharmaceutical
Basepolyurethane resin; one-component enamel, cures with air moisture
ColourRAL colours; matt finish
Packagingpacks of 0.8; 16 and 33 kg
Application methodmatt thin-layer protective and decorative coating for floors and walls over LEVL Coat 151 primer: velour roller or brush, 2 coats of 150–200 g/m² each (smooth, or textured with a sand broadcast); for bright colours, an additional coat of RAL 7032/7035
Application temperatureair and substrate from −10 to +30 °C; material +10…+25 °C (recommended +15…+25 °C); air humidity 40–80 %; substrate moisture no more than 4 % by weight; 3 °C above the dew point
Curingat 75–80 % humidity: light loads / recoat interval: +10 °C 24 h, +20 °C 12 h, +30 °C 8 h; foot traffic 5 / 3 / 2 days; full strength gain 8 / 6 / 4 days; drying to degree 3 no more than 7 h
Key propertiesTaber abrasion (CS10 / 1000 g / 1000 rev.) no more than 50 mg; cross-cut adhesion no more than grade 1; gloss no more than 20 GU; density 1.675 ± 0.105 g/cm³; non-volatile content at least 82 %; bridges fine cracks; service temperature from −25 to +60 °C; chemical resistance: on request from Ingri
Layer thicknessdesign system thickness 0.5 mm (smooth coating); up to 0.5 mm (textured)
Consumption300–400 g/m² (2 coats of 150–200 g/m²); systems: smooth — LEVL Coat 151 primer 0.40 kg/m² + LEVL Coat 251 0.30 kg/m²; bright colours — plus an additional light coat 0.14 kg/m²; textured — primer 151 0.40 + 251 0.20 + sand 0.1–0.3 mm 0.50 + seal coat 251 0.40 kg/m²
Shelf life6 months from the date of manufacture; storage at +5…+25 °C
StandardsTU 2312-004-94613022-2006; works per SP 29.13330.2011, SP 71.13330.2017; test methods GOST 31992.1, GOST R 31939, GOST 19007, GOST 31975, GOST 15140

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by LEVL (INGRI)