LEVL (INGRI)
LEVL Top C50 — topping for floors with service temperatures up to +200 °C
Economical hardening topping for workshops, warehouses and car parks with strength from 50 MPa and a service range from −40 to +200 °C.
Price on request
LEVL (INGRI)
LEVL PoliCem PU 013 ER — antistatic polyurethane-cement floor
The antistatic version of the polyurethane-cement, LEVL PoliCem PU 013 ER, works in a system with a copper earthing circuit and a conductive layer laid under the main coating. The floor’s electrical resistance is 10⁴–10⁶ ohm, compressive strength at least 55 MPa, flexural 15 MPa. The coating is resistant to hot water, operates from −40 to +60 °C and has a fire safety certificate (D1, T1, V1, RP1). Colour: dark grey; applications: chemicals, oil refining, hangars, electronics, medicine, battery rooms.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | polyurethane-cement (PU-cement) floors |
| Use | antistatic/conductive, chemically resistant, production workshops, warehouses and logistics |
| Base | three-component: modified polyurethane, cement, aggregate |
| Colour | dark grey |
| Packaging | 25.5 kg kit: A — 4.3 kg; B — 5.2 kg (metal pail or PE jerrycan); C — paper bag 16.0 kg; A:B:C — 1.00:1.21:3.72 |
| Application method | antistatic coating: LEVL Coat 101 primer (up to +60 °C) or PoliCem PU 15, copper circuit connected to earth, conductive layer, main layer by gauge rake + spiked roller |
| Application temperature | air and substrate +10…+30 °C (recommended +17…+23 °C); substrate moisture no more than 5.0 % (with LEVL Coat 101) |
| Curing | pot life at +20 °C at least 17 minutes; finishing layer over the primer after 12–48 h; foot traffic: +10 °C ~3 days, +20 °C ~1 day, +30 °C ~20 hours; light loads ~6 / ~4 / ~2 days; full strength gain ~10 / ~7 / ~5 days |
| Key properties | Electrical resistance 10^4–10^6 ohm; compressive strength at 28 days at least 55 MPa; flexural at least 15 MPa; bond at least 2.0 MPa; Taber abrasion no more than 1000 mg; service temperature from −40 °C to +60 °C, hot water |
| Layer thickness | 2–4 mm (system: 4.0 mm) |
| Consumption | 7.2 kg/m² for 4.0 mm (system example) |
| Shelf life | 6 months; storage at +5…+30 °C |
| Standards | TU 20.30.22-087-94613022-2021; GOST IEC 61340-4-1-2017; fire safety certificate RU C-RU.PB68.V.00645/21 (D1; T1; V1; RP1) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL PoliCem PU 015 — polyurethane-cement paint coating
Thin-layer PU-cement coating and sand seal coat in PoliCem systems for food and chemical workshops; Taber abrasion up to 60 mg.
Price on request
LEVL (INGRI)
LEVL RemTixo Finish 5 — cementitious filler for concrete surfaces
Thin-layer polymer-cement filler for levelling concrete and filling pores and cavities; bond to substrate at least 2.0 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 221 AR — acrylic paint for outdoor concrete
Self-priming acrylic RAL coating for concrete and metal exposed to precipitation and UV; applied at temperatures from −20 °C.
Price on request
LEVL (INGRI)
LEVL Coat 502 — clear epoxy layer for self-levelling 3D floors
Three-component clear compound for the finishing layer of a 3D floor over decorative PVC film; Taber abrasion up to 50 mg.
Price on request
LEVL (INGRI)
LEVL JOINT PANEL 130 — composite panel for joints in industrial floors
Polymer joint panel with elastic polyurethane infill for constructing and repairing thermal and shrinkage joints in warehouses and workshops.
Price on request