Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
LEVL Coat 108 — filled epoxy primer for polymer floors
LEVL (INGRI)

LEVL Coat 108 — filled epoxy primer for polymer floors

Floor primers

LEVL Coat 108 primer contains mineral filler, so it creates a textured surface without a sand broadcast. It is used under all LEVL epoxy and polyurethane floors, applied with a velour roller, flat trowel or brush in two or more coats. Mixed with quartz sand, the compound serves as a filler for unevenness, potholes and cracks. Adhesion to concrete is at least 2.5 MPa, substrate moisture up to 5 %, service from −10 to +60 °C, short-term up to +90 °C.

Specifications

ManufacturerLEVL (INGRI) — OOO “Ingri”, Saint Petersburg
Typefloor primers
Basebisphenol A epoxy resin with mineral filler + amine hardener; small amounts of organic solvent
Colour“wet concrete” look (colour of the substrate); as a filler compound: grey to beige
Packagingkits of 1 kg, 10 kg, 25 kg (A and B in two containers); A : B = 3.76 : 1 (by weight)
Application methodfilled universal primer under all LEVL epoxy and polyurethane floors (velour roller, flat trowel, brush; 2 or more coats; textured surface without a sand broadcast); filler compound with quartz sand for unevenness, potholes and cracks
Application temperatureair and substrate +10…+30 °C (recommended +10…+25 °C); material +15…+30 °C (recommended +17…+23 °C); air humidity no more than 80 %; substrate moisture no more than 5.0 % by weight; 3 °C above the dew point
Curinglight loads: +10 °C ~1 day, +20 °C ~12 h, +30 °C ~6 h; foot traffic ~5 / ~3 / ~2 days; full strength gain ~10 / ~7 / ~4 days; next coat after 12–48 h at +20 °C
Key propertiesAdhesion to concrete at least 2.5 MPa; density (A+B) 1.41 ± 0.05 g/cm³; non-volatile content at least 95 %; viscosity of A+B at 23 °C 1200–1500 mPa·s; pot life +10 °C ~50 min, +20 °C ~30 min, +30 °C ~15 min; service temperature from −10 °C to +60 °C (short-term up to +90 °C)
Consumption0.1–0.25 kg/m² per coat (2 coats recommended; at an application rate of 100–250 g/m²); priming of a cementitious substrate 0.30 kg/m²; filling 0.5 kg/m² + quartz sand 0.1–0.3 mm 0.8 kg/m²
Shelf life12 months from the date of manufacture; storage at +5…+25 °C
StandardsTU 2312-001-94613022-06 with Amendment No. 1; not subject to mandatory fire safety certification (Decision No. 396-RZ/19 of 26.07.2019, No. 123-FZ); test methods GOST 31992.1, GOST 31939, GOST 25271, GOST 28574

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by LEVL (INGRI)