LEVL (INGRI)
LEVL Coat 218 — high-gloss epoxy primer-enamel for floors
Thin-layer RAL paint coating for food, pharmaceutical and storage premises and car parks; service from −25 to +60 °C.
Price on request
LEVL (INGRI)
LEVL Coat 075 — MMA curing accelerator for winter work
LEVL Coat 075 accelerator makes it possible to lay LEVL Coat 171, 271 and 573 methyl methacrylate floors at temperatures from 0 to −10 °C. The liquid based on N,N-dimethyl-p-toluidine is added to the base material before LEVL Coat 070 catalyst; at above-zero temperatures the accelerator is not used. It does not affect the decorative and performance properties of the coating. It must be stored separately from the catalyst, since direct contact between them poses an explosion hazard; packaging: 1 and 4 kg containers.
Specifications
| Manufacturer | LEVL (INGRI) — OOO “Ingri”, Saint Petersburg |
|---|---|
| Type | flooring material |
| Base | N,N-dimethyl-p-toluidine (DMPT), MMA curing accelerator |
| Colour | clear yellow liquid |
| Packaging | containers of 1 kg, 4 kg |
| Application method | curing accelerator for LEVL Coat 171, 271, 573 carboacrylate materials at temperatures from 0 °C to −10 °C: added to the base material at no more than 2 % by weight before adding LEVL Coat 070 catalyst; use only at sub-zero temperatures |
| Application temperature | ambient from 0 °C to minus 10 °C |
| Key properties | Density 0.94 ± 0.05 g/cm³; non-volatile content at least 99 %; initial boiling point 211 °C; flash point (closed cup) 76 °C; ignition temperature 83 °C; does not affect the decorative and performance properties of the coating |
| Consumption | no more than 2 % of the total weight of the material |
| Shelf life | 12 months in the original packaging; store at no more than +30 °C, separately from LEVL Coat 070 catalyst |
| Standards | TU 20.14.41-083-94613022-2020 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by LEVL (INGRI)
LEVL (INGRI)
LEVL Top C50 — topping for floors with service temperatures up to +200 °C
Economical hardening topping for workshops, warehouses and car parks with strength from 50 MPa and a service range from −40 to +200 °C.
Price on request
LEVL (INGRI)
LEVL Coat 111 — epoxy impregnation for hardening concrete
Two-component epoxy impregnation for dustproofing and hardening porous mineral substrates; adhesion to concrete over 4.0 MPa.
Price on request
LEVL (INGRI)
LEVL Coat 306 DA — decontaminable epoxy self-levelling floor
Smooth seamless epoxy coating for nuclear industry rooms subject to decontamination; Shore D hardness at least 70.
Price on request
LEVL (INGRI)
LEVL Coat 352 — wear-resistant polyurethane floor for car parks and warehouses
Single-layer low-density PU self-levelling coating for car parks, car washes, warehouses and sales floors; service from −40 to +80 °C.
Price on request
LEVL (INGRI)
LEVL Concrete Strong 12 — lithium silicate impregnation for concrete floors
Hardening and dustproofing lithium silicate impregnation with 11 % non-volatile content for concrete, topping and polished floors.
Price on request