Monopol
Monopol BR 400M — winter repair mortar down to −10 °C
Winter thixotropic R3 repair mortar for concrete, reinforced concrete and industrial floors; work at temperatures from −10 to +35 °C.
Price on request
Monopol
Monopol TOP 600 — quartz-corundum dry-shake topping with minimum abrasion
TOP 600 combines improved quartz and synthetic corundum aggregates and shows the lowest abrasion in the TOP range — 0.07 g/cm². The mix is intended for an intensive regime of abrasion and impact loads indoors and outdoors: compressive strength at 28 days at least 100 MPa, shrinkage no more than 0.07%, intensity of mechanical impact per SNiP 2.03.13 — significant. Combustibility category NG. It is used in workshops, warehouses, car parks, ramps and outdoor areas.
Specifications
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | toppings |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public, outdoor areas |
| Base | Portland cement, graded improved quartz and synthetic corundum aggregates |
| Colour | natural |
| Packaging | multi-wall paper bag 25 kg, 40 bags per pallet |
| Application method | dry application onto freshly laid concrete in 2 stages (60-65% + 35-40% of the consumption), floating with a power trowel with a disc, finishing with blades; curing — Monopol Sealer 2/2S/2T/2E 0.1 l/m² |
| Application temperature | application temperature from +5 to +25 °C |
| Curing | At substrate temperature +10/+20/+30 °C: foot traffic ≈20/≈15/≈10 h, putting into service ≈10/≈7/≈5 days, full strength gain 28 days (method statement table); in the specifications table: foot traffic after 24 h, light load (no more than 20 MPa) after 7 days |
| Key properties | Compressive strength at 28 days min. 100 MPa; flexural strength at 28 days min. 8.5 MPa; abrasion LKI-3M 0.07 g/cm²; impact (GOST 30353) at least 20 kg from a height of 1 metre; shrinkage max. 0.07%; max. particles 3.0 mm; bulk density 1950 kg/m³; intensity of mechanical impact — significant, exposure to liquids — high (SNiP 2.03.13); NG |
| Shelf life | 12 months from the date of manufacture |
| Standards | methods: GOST 30353, SP 28.13330.2012, SNiP 2.03.13 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Monopol
Monopol
Monopol Hard 30 — self-levelling compound for floor coverings
Polymer-cement self-leveller for levelling concrete under industrial, commercial and sports floor coverings; polymer floor after 3 days.
Price on request
Monopol
Monopol Epoxy 4 — clear epoxy primer for self-levelling floors
Clear solvent-free epoxy primer for self-levelling polymer floors; with quartz sand it is used to repair cracks and spalls in concrete.
Price on request
Monopol
Monopol BR 800 Liquid — high-strength pourable repair mortar
Non-shrink pourable R4 repair mortar for industrial concrete and topping floors; 40 MPa after one day and 80 MPa at 28 days.
Price on request
Monopol
Monopol Hard CS — high-strength polymer-cement floor screed
Polymer-cement screed for levelling and local repair of concrete floors in workshops and public buildings; compressive strength from 35 MPa.
Price on request
Monopol
Monopol 1 (lithium impregnation) — hardening and dustproofing concrete
Deep-penetrating lithium impregnation for dustproofing, hardening and polishing concrete floors in workshops, warehouses, car parks and sales floors.
Price on request