Monopol Epoxy 4 — clear epoxy primer for self-levelling floors
Clear solvent-free epoxy primer for self-levelling polymer floors; with quartz sand it is used to repair cracks and spalls in concrete.

Epoxy 5 Base is a universal base for high-build filled and anti-slip epoxy systems. The compound works as a stand-alone coating, as a levelling underlayer beneath Monopol Epoxy 5M and as a rough non-slip coating with quartz sand. Shore D hardness 80–85, compressive strength after 7 days at least 70 MPa, Taber abrasion 46 mg, non-sparking. Colours — natural, grey and dark grey.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | epoxy floors |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public |
| Base | epoxy resin and polyamine hardener (base levelling compound) |
| Colour | natural, grey, dark grey |
| Packaging | 30 kg kit: component A 26.3 kg + component B 3.7 kg |
| Application method | stand-alone coating (ME 45), levelling underlayer beneath Epoxy 5M (ME 455BM), rough non-slip coating with quartz sand (ME 455R); over Monopol Epoxy 4 / 4M / 4S primer; poured with a gauge rake and spiked roller; use within 20 minutes |
| Application temperature | substrate and air during application and curing not below +10 °C; substrate at least 3 °C above the dew point; substrate moisture no more than 4% by weight |
| Curing | At +20 °C: foot traffic 24 h, light vehicle traffic 72 h, full vehicle load 120 h; pot life at 23 °C at least 20 min |
| Key properties | Compressive strength at 7 days at least 70 MPa; flexural strength at 7 days at least 30 MPa; Taber 46 mg; Shore D 80-85; elongation 5-7%; density 1.55 g/cm³; non-volatiles ≈100%; non-sparking |
| Layer thickness | levelling layer (ME 455BM) 1-4 mm; rough coating ME 455R 2.5-3.0 mm |
| Consumption | 1.55 kg per 1 mm of thickness per 1 m² (stand-alone coating ME 45); in the rough system ME 455R — 0.7-0.9 kg/m² + quartz sand 0.4-0.8 mm 3.0-4.0 kg/m² |
| Shelf life | 12 months from the date of manufacture |
| Standards | MONOPOL polymer floor coating certificates |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Clear solvent-free epoxy primer for self-levelling polymer floors; with quartz sand it is used to repair cracks and spalls in concrete.
Topping based on modified quartz for floors with a high regime of abrasion and impact loads; compressive strength from 100 MPa, coloured version available.
Non-shrink rapid-hardening R4 mortar with fibre for repairing industrial floors in warehouses, workshops and car parks; from 30 MPa after one day.
Self-levelling polyurethane-cement floor for car parks, wet production areas and food warehouses; compressive strength from 58 MPa, R10.
Water-based wax emulsion for curing fresh concrete and toppings indoors: odourless, clear and matt after drying.
Rigid-elastic polyurethane self-levelling floor for production sites, medicine, schools, laboratories and car parks; elongation at break from 70%.