Monopol
Monopol Epoxy 4S — filled epoxy primer with high hiding power
Filled epoxy primer with high hiding power for self-levelling floors in workshops, warehouses and car parks; cures quickly, solvent-free.
Price on request
Monopol
Monopol Policrete 203 — self-levelling polyurethane-cement floor
The self-levelling Policrete 203 is designed for constant foot traffic and low-intensity vehicle traffic, including forklifts. It is laid in car parks, wet production areas, warehouses including food warehouses, as well as in amenity and administrative premises. Compressive strength at least 58 MPa, flexural strength at least 27.1 MPa, Shore D hardness from 84, slip resistance R10, class KM1. The coating is resistant to water, oils, petrol and medium-concentration acid and alkali solutions.
Specifications
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | polyurethane-cement floors |
| Use | car parks and ramps, wet premises, warehouses and logistics, food and pharmaceutical, retail and public, chemically resistant |
| Base | polyurethane resin with mineral filler and pigment paste, four-component self-levelling |
| Colour | according to the colour chart |
| Packaging | 12.8 kg: component A 2.5 kg + B 2.8 kg + C 7.5 kg (pail) + pigment paste 150 ml |
| Application method | self-levelling layer 2-3 mm over Monopol Policrete 100 primer (broadcast with Monopol Quartz) |
| Application temperature | substrate temperature at the time of application from +10 °C to +25 °C; substrate moisture no more than 12% |
| Curing | At +20 °C: walking after 12 hours; light vehicle loads after 24 hours; full vehicle loads and chemically aggressive liquids after two days |
| Key properties | Compressive strength at least 58 MPa; flexural strength at least 27.1 MPa; impact strength 9.3 J/cm²; abrasion no more than 0.1 g/cm²; AR 0.5; Shore D at least 84; R10; water absorption 0%; KM1; vapour permeability yes; density 1.66 g/cm³; adhesion > 5.1 MPa (cohesive failure in concrete); chemical resistance to water, dilute and medium-concentration alkalis and acids, oils, petrol, solvents |
| Layer thickness | from 2 to 3 mm |
| Consumption | 1.85 kg/m² per 1 mm of layer thickness |
| Shelf life | 12 months from the date of manufacture; store at a temperature not below +5 °C and not above +30 °C |
| Standards | fire hazard class KM1 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Monopol
Monopol
Monopol BR 400M — winter repair mortar down to −10 °C
Winter thixotropic R3 repair mortar for concrete, reinforced concrete and industrial floors; work at temperatures from −10 to +35 °C.
Price on request
Monopol
Monopol TOP WD (wet to dry) — pourable topping for car parks and ramps
Pourable high-strength screed-topping for car parks, ramps and renovation of old concrete floors; flexural strength from 10 MPa.
Price on request
Monopol
Monopol Primer 17 — deep-penetrating acrylic primer
Deep-penetrating acrylic primer for absorbent substrates under Monopol Hard self-levelling floors; dries in up to 4 hours, keeps for 2 years.
Price on request
Monopol
Monopol Hard 50S (non-sparking) — high-strength self-levelling floor
Non-sparking high-flow self-levelling floor and non-shrink repair compound for concrete and topping floors; compressive strength from 55 MPa.
Price on request
Monopol
Monopol Hard 50 — high-strength cement-based self-levelling floor
High-strength polymer-cement finishing floor and repair compound for concrete floors; compressive strength from 55 MPa, walkable after 6 hours.
Price on request