Monopol Epoxy 5 AS7 — antistatic epoxy self-levelling floor
Antistatic epoxy floor for premises with high-precision equipment, pharmaceuticals and laboratories; resistance 10⁶–10⁹ Ω.

Every Monopol polyurethane-cement system starts with Policrete 100 primer; it also serves as the binder for a repair compound with sand. The product is three-component and solvent-free; the fresh layer is broadcast with Monopol Quartz sand to accelerate curing. Adhesion to the substrate is above 4.3 MPa, with failure in the concrete. The primer is non-sparking, resistant to water, dilute and medium-concentration acids and alkalis, oils and petrol, and does not impart foreign odours to stored food.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | floor primers |
| Use | food and pharmaceutical, chemically resistant |
| Base | three-component polyurethane-cement priming compound; solvent-free |
| Colour | clear, slightly yellowish |
| Packaging | 7.4 kg: component A 2.5 kg (canister) + B 2.5 kg (canister) + C 2.4 kg (dry mix, pail) |
| Application method | primer in Monopol Policrete systems and binder for a repair compound with sand; broadcasting the primer with Monopol Quartz sand 0.5-1.0 kg/m² to accelerate curing |
| Application temperature | substrate temperature at the time of application from +10 °C to +25 °C; recommended air humidity from 35% to 75% |
| Curing | subsequent layers — when the primed surface is no longer tacky |
| Key properties | Adhesion to substrate > 4.3 MPa (cohesive failure in concrete); non-sparking; resistant to water, dilute and medium-concentration solutions of alkalis and acids, mineral oils, petrol, solvents; does not impart foreign odours to stored food |
| Consumption | 400-600 g/m² (depends on substrate porosity) |
| Shelf life | 12 months from the date of manufacture (original packaging); store at a temperature not below +5 °C and not above +30 °C |
| Standards | sanitary-epidemiological expert opinion 'MONOPOL Policrete polymer-mineral floor coatings' |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Antistatic epoxy floor for premises with high-precision equipment, pharmaceuticals and laboratories; resistance 10⁶–10⁹ Ω.
Epoxy self-levelling floor filled with quartz sand for workshops, warehouses, car parks and retail buildings; fire hazard class KM1.
Cement bonding layer before repair compounds and screeds on concrete, reinforced concrete and metal; adhesion to concrete from 3 MPa.
Clear membrane-forming curing compound for fresh concrete, toppings and terrazzo floors in workshops, warehouses and car parks; dries in 2 hours.
Pourable high-strength screed-topping for car parks, ramps and renovation of old concrete floors; flexural strength from 10 MPa.
Coarse quartz-corundum mix for concrete floors with very high loads in workshops, warehouses and car parks; from 80 MPa.