Monopol
Monopol 1 (lithium impregnation) — hardening and dustproofing concrete
Deep-penetrating lithium impregnation for dustproofing, hardening and polishing concrete floors in workshops, warehouses, car parks and sales floors.
Price on request
Monopol
Monopol Policrete 306 — polyurethane-cement floor for food production
The self-levelling Policrete 306 is intended for the food and processing industry, pharmaceuticals, warehouses, car parks and agricultural complexes. It works in dry and wet conditions under light and moderate loads — pedestrians, pneumatic-tyred vehicles and trolleys with polymer wheels. Compressive strength at least 58 MPa, Shore D hardness from 81, slip resistance R10, class KM1, water absorption 0%. Anchor grooves must be cut along all abutments.
Specifications
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | polyurethane-cement floors |
| Use | car parks and ramps, food and pharmaceutical, warehouses and logistics, wet premises, chemically resistant |
| Base | polyurethane resin with mineral filler and pigment paste, four-component self-levelling |
| Colour | according to the colour chart |
| Packaging | 20.3 kg: component A 2.5 kg + B 2.8 kg + C 15 kg + pigment paste 150 ml |
| Application method | self-levelling layer 3.0-6.0 mm (recommended average 4.0 mm) over Monopol Policrete 100 primer; anchor grooves at abutments are mandatory |
| Application temperature | substrate temperature at the time of application from +10 °C to +25 °C; recommended air humidity from 35% to 75%; substrate moisture no more than 12%; substrate 3 °C above the dew point |
| Curing | At +20 °C: walking after 12 hours; light vehicle loads after 24 hours; full vehicle loads and chemically aggressive liquids after two days |
| Key properties | Compressive strength at least 58 MPa; flexural strength at least 18 MPa; impact strength 5.3 J/cm²; abrasion no more than 0.19 g/cm²; AR 0.5; Shore D at least 81; R10; water absorption 0%; KM1; vapour permeability yes; density 1.94 g/cm³; adhesion > 4.5 MPa (cohesive failure in concrete); chemical resistance to water, dilute and medium-concentration alkalis and acids, oils, petrol, solvents |
| Layer thickness | from 3.0 to 6.0 mm (recommended average layer 4.0 mm) |
| Consumption | from 7.0 kg/m² |
| Shelf life | 12 months from the date of manufacture; store at a temperature not below +5 °C and not above +30 °C |
| Standards | fire hazard class KM1; references to SP 29.13330.2011, SNiP 2.03.13-88 Floors |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Monopol
Monopol
Monopol Epoxy 4 AS — conductive primer for epoxy antistatic floors
Black conductive epoxy primer for the ME 45AS antistatic system with Epoxy 5 AS6/AS7; for chemicals, pharmaceuticals, oil and gas and grain elevators.
Price on request
Monopol
Monopol TOP 400 (non-sparking) — dry-shake topping for explosion-hazard sites
Non-sparking hardening topping for floors of fuel and lubricant stores, warehouses and workshops with fire and explosion hazards; strength from 70 MPa.
Price on request
Monopol
Monopol Hard 40S (non-sparking) — self-levelling floor for explosion-hazard premises
Non-sparking polymer-cement self-levelling floor for explosion and fire hazard workshops, warehouses and car parks with medium and high loads; from 40 MPa.
Price on request
Monopol
Monopol Hard 50S (non-sparking) — high-strength self-levelling floor
Non-sparking high-flow self-levelling floor and non-shrink repair compound for concrete and topping floors; compressive strength from 55 MPa.
Price on request
Monopol
Monopol Primer 17 — deep-penetrating acrylic primer
Deep-penetrating acrylic primer for absorbent substrates under Monopol Hard self-levelling floors; dries in up to 4 hours, keeps for 2 years.
Price on request