Monopol Policrete 306 — polyurethane-cement floor for food production
Self-levelling polyurethane-cement floor for the food industry, pharmaceuticals, warehouses and car parks with dry and wet conditions; class KM1.

The lithium hardener Monopol 1 penetrates deep into concrete and is used on new and old floors made of concrete of class no lower than B20, as well as in the technology of staged concrete polishing with diamond pads. According to the manufacturer, surface strength increases by 15% within 60 minutes after treatment, and temperature, ultraviolet light and water do not affect the treated concrete. An addition of 3% or more to the scrubber-dryer water is used for maintaining topping floors. Container 5 l.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | impregnations and concrete hardeners |
| Use | production workshops, retail and public, warehouses and logistics, car parks and ramps |
| Base | deep-penetrating lithium impregnation (liquid hardener) |
| Colour | clear liquid with possible slight sediment |
| Packaging | 5 l container |
| Application method | low-pressure sprayer and microfibre mop until saturated without puddles (surface wet for 10-15 min); new and old concrete floors, concrete from B20 (M250); technology of staged concrete polishing with diamond pads; additive to scrubber-dryer water (from 3%) for maintaining topping floors |
| Application temperature | substrate temperature not below +5 °C and not above +30 °C |
| Key properties | Dry residue at least 15%; density 1.1 g/cm³; temperature, UV radiation and water spray have no effect on the treated concrete; does not change the combustibility class |
| Shelf life | 12 months from the date of manufacture |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Self-levelling polyurethane-cement floor for the food industry, pharmaceuticals, warehouses and car parks with dry and wet conditions; class KM1.
Multi-purpose epoxy compound: stand-alone coating, levelling layer under Epoxy 5M or anti-slip system with quartz sand.
Conductive polyurethane-cement floor for chemicals, pharmaceuticals, explosion-hazard production sites and warehouses; resistance below 10⁹ Ω.
High-build polyurethane-cement floor for food and chemical production, cold stores and freezer rooms; compressive strength from 57 MPa.
Clear membrane-forming curing compound for fresh concrete, toppings and terrazzo floors in workshops, warehouses and car parks; dries in 2 hours.
Black conductive epoxy primer for the ME 45AS antistatic system with Epoxy 5 AS6/AS7; for chemicals, pharmaceuticals, oil and gas and grain elevators.