Monopol Hard CS — high-strength polymer-cement floor screed
Polymer-cement screed for levelling and local repair of concrete floors in workshops and public buildings; compressive strength from 35 MPa.

Sealer 2T is a colourless membrane-forming compound for curing freshly laid concrete, toppings, thin-layer cement and repair compounds and terrazzo floors. It must be applied no later than 24 hours after placing — by roller, brush or sprayer, at temperatures from +4 to +30 °C. According to the manufacturer, at +23 °C the product dries to degree 3 in 2 hours. It is supplied in 20 l metal pails.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | impregnations and concrete hardeners |
| Use | production workshops, warehouses and logistics, car parks and ramps, retail and public, outdoor areas |
| Base | one-component polymer solution (clear membrane-forming compound) |
| Colour | clear/colourless |
| Packaging | metal pails 20 litres |
| Application method | curing of freshly laid concrete, toppings, thin-layer cement and repair compounds, terrazzo floors — no later than 24 hours after placing; roller, brush or sprayer |
| Application temperature | from +4 °C to +30 °C |
| Key properties | viscosity VZ-246 15 - 25 s; density 0.89 - 0.92 g/cm³ |
| Consumption | 0.1 l per 1 m² |
| Shelf life | 1 year from the date of manufacture in an unopened sealed container |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Polymer-cement screed for levelling and local repair of concrete floors in workshops and public buildings; compressive strength from 35 MPa.
Gloss epoxy enamel for dustproofing and protecting concrete floors in workshops, warehouses and car parks; full loads after 72 hours.
Non-sparking high-flow self-levelling floor and non-shrink repair compound for concrete and topping floors; compressive strength from 55 MPa.
Topping with quartz and synthetic corundum aggregate for intensive loads; abrasion 0.07 g/cm², the lowest in the TOP series.
Non-shrink pourable R4 repair mortar for industrial concrete and topping floors; 40 MPa after one day and 80 MPa at 28 days.
Lightfast membrane-forming curing compound for fresh concrete and toppings on outdoor areas and the sunny side; 20 l pail.