The winter version of the repair mortar, BR 400M, makes it possible to restore concrete, reinforced concrete and brick structures, including industrial floors and outdoor areas, at temperatures down to −10 °C. After placing, the surface is protected from drying out for 1–2 days. Repair mortar class R3, compressive strength at least 40 MPa, flexural strength at least 6 MPa, adhesion at least 1.5 MPa, frost resistance F 400 and water impermeability W16.
| Manufacturer | Monopol — OOO “TEKHBETON” |
|---|---|
| Type | concrete floor repair |
| Use | production workshops, outdoor areas |
| Base | dry thixotropic repair mix based on Portland cement with quartz sand and modifying additives (winter) |
| Colour | natural |
| Packaging | 25 kg bag |
| Application method | repair of concrete, reinforced concrete and brick structures (industrial floors are on the list) at sub-zero temperatures; curing — protection from drying out for 1-2 days |
| Application temperature | from -10 to +35 °C |
| Key properties | Class R3; compressive strength at least 40 MPa; flexural strength at least 6 MPa; adhesion at 28 days at least 1.5 MPa; F 400; W16; aggregate no more than 0.63 mm; work down to -10 °C |
| Layer thickness | from 5 to 50 mm per pass |
| Consumption | 2 kg per 1 m² at a layer thickness of 1 mm |
| Shelf life | 12 months in the manufacturer's packaging |
| Standards | repair mortar class R3; reference to SP 70.13330.2012; storage per GOST 31357-2007 cl. 8 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Hardening dustproofing impregnation with a water-repellent effect for concrete floors and screeds indoors and outdoors; applied to concrete aged 14 days or more.
Clear membrane-forming curing compound for fresh concrete, toppings and terrazzo floors in workshops, warehouses and car parks; dries in 2 hours.
Deep-penetrating lithium impregnation for dustproofing, hardening and polishing concrete floors in workshops, warehouses, car parks and sales floors.
Rigid-elastic polyurethane self-levelling floor for production sites, medicine, schools, laboratories and car parks; elongation at break from 70%.
Thin-layer polyurethane-cement coating for food and wet workshops, garages and warehouses; slip resistance R10, class KM1.
Black conductive epoxy primer for the ME 45AS antistatic system with Epoxy 5 AS6/AS7; for chemicals, pharmaceuticals, oil and gas and grain elevators.
