ALFAPOL K — high-strength magnesia self-levelling floor
Non-shrink magnesia self-levelling floor for production halls: compressive strength 50 MPa, resistant to petrol and oils, NG.

Self-levelling polyurethane with marble filler is laid over the PU-1AS conductive layer and a copper earthing circuit, giving a smooth antistatic coating with resistance below 10⁶ Ω. Shore D hardness is from 70, Taber abrasion no more than 60 mg, bond strength to concrete 2 MPa. At +20 °C foot traffic is allowed after one day and full load after 7 days; the colour is chosen from a wide tinting palette.
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | polyurethane floors |
| Use | production halls, food and pharmaceutical, antistatic/conductive, retail and public |
| Base | polyurethane; Polyurethane antistatic self-levelling coating, industrial floor |
| Colour | wide range of tints |
| Packaging | Metal containers: Component A – 20 kg, Component B – 4.6 kg. Polypropylene bag: Component C - graded marble filler 0.2-0.5 mm |
| Application temperature | Application temperature, °C: +10°C to +30°C; Substrate moisture, max.: 5%; Air and substrate temperature: from +10 to +25°C |
| Curing | At 10 / 20 / 30 °C: foot traffic after 3 / 1 / 1 days, medium load after 7 / 5 / 3 days, full load after 10 / 7 / 5 days; Recoat interval, h, min.: 12; Foot traffic, h, min.: 24; Full cure, days, min.: 7 |
| Key properties | Shore D hardness, min.: 70; Taber abrasion (CS10/1000 g/1000 rev), max., mg: 60; Bond strength to concrete (failure in concrete), min., MPa: 2; Point-to-point resistance, less than, Ohm: 10^6; Resistance to ground point, less than, Ohm: 10^6; Service temperature, °C: -30 to +40 |
| Consumption | Consumption, neat, kg/m²/mm: 1.45; for 1 mm thickness: 1.45 kg/m² of compound. CONSUMPTION for 2 mm thickness (with marble sand 1:0.5): 2.2 kg/m² of compound + 1.1 kg/m² of sand (fr. … |
| Shelf life | Shelf life in unopened factory packaging – 6 months from the date of manufacture.; Shelf life, months: 6 |
| Standards | TU 20.16.56-002-82166262-2016 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Non-shrink magnesia self-levelling floor for production halls: compressive strength 50 MPa, resistant to petrol and oils, NG.
Dry trowelling mix with corundum aggregate for wear-resistant floors in production facilities and car parks: 70 MPa, abrasion up to 0.3 g/cm².
Cement-based "liquid topping" with microfibre for floors under significant abrasive and impact loads, on old and fresh concrete.
Matt polyurethane sealer, resistant to fading and ultraviolet, for protecting mineral and polymer floors.
Vapour-permeable solvent-free conductive epoxy primer for antistatic polymer floors in workshops and warehouses.
Coloured wear-resistant self-levelling floor on special cement for retail, public and production premises, class NG.