ALFAPOL
ALFAPOL MB(i) — magnesia-based non-sparking antistatic concrete floor
Magnesia concrete floor with crushed marble for workshops and warehouses: it does not spark, dissipates static charge and resists petrol and mineral oil.
Price on request
ALFAPOL
ALFAPOL EP-2TG — epoxy anti-slip deck coating
The EP-2TG anti-slip epoxy coating is applied on metal (over an anti-corrosion primer) and on concrete; bond strength to metal is at least 4.7 MPa, to concrete 2 MPa. The coating belongs to combustibility group G1 and fire hazard class KM2, with Shore D hardness of at least 80 and compressive strength of 60 MPa. The material is solvent-free and odourless, tintable to RAL and resistant to water and chemical media.
Specifications
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | epoxy floors |
| Use | production halls, chemically resistant |
| Base | epoxy; Epoxy anti-slip deck coating G1 |
| Colour | tinting to RAL |
| Packaging | Metal containers: Component A 16 kg, Component B 4 kg. Polypropylene bag: Component C 25 kg |
| Application method | priming with ALFAPOL EP-2TG thinned with solvent; on metal — ALFAPOL EP-1IK anti-corrosion primer; substrate repair — ALFAPOL EP-1G with sand |
| Application temperature | Application temperature, °C: +10°C to +30°C |
| Curing | At 10 / 20 / 30 °C: foot traffic after 3 / 2 / 1 days, medium load after 7 / 5 / 3 days, full load after 10 / 7 / 5 days; Recoat interval, h, min.: 12 |
| Key properties | Shore D hardness, min.: 80; Compressive strength, min., MPa: 60; Flexural strength, min., MPa: 35; Taber abrasion (CS10/1000 g/1000 rev), max., mg: 60; Bond strength to concrete (failure in concrete), min., MPa: 2; Bond strength to metal (failure in the adhesive), min., MPa: 4.7; Fire hazard class: KM2; Combustibility group: G1; Service temperature, °C: -30 to +50 |
| Shelf life | Shelf life in unopened factory packaging – 6 months from the date of manufacture. |
| Standards | TU 20.16-40-001-82166262-2015; TU 20.16.40-001-82166262-2015 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ALFAPOL
ALFAPOL
ALFAPOL VB — waterproof cement concrete floor
Finished concrete floor on crushed granite for workshops, warehouses, car parks, wet rooms and open areas: W16, F400.
Price on request
ALFAPOL
ALFAPOL PU-4OG — polyurethane-cement paint, primer and base for coatings
Versatile polyurethane-cement compound: floor paint, primer and base for thick-layer coatings, standard colour RAL 7004.
Price on request
ALFAPOL
ALFAPOL MB mosaic marble — magnesia terrazzo with marble
Non-shrink magnesia mosaic concrete with marble aggregate for decorative floors in retail and public buildings.
Price on request
ALFAPOL
ALFAPOL VK — cement self-levelling finishing floor
One-component cement self-levelling floor for workshops, warehouses, retail buildings and areas with significant static loads.
Price on request
ALFAPOL
ALFAPOL TOP KORUND — corundum dry topping for concrete
Dry trowelling mix with corundum aggregate for wear-resistant floors in production facilities and car parks: 70 MPa, abrasion up to 0.3 g/cm².
Price on request