ALFAPOL TOP 100 — quartz topping for concrete floors
Dry hardening mix based on Portland cement and quartz for concrete floors in workshops and open areas, with abrasion no more than 0.4 g/cm².

This high-strength oil- and petrol-resistant Portland cement coating levels itself and does not spark, which makes it suitable for workshops, warehouses and car parks. Compressive strength is at least 35 MPa, flexural strength 6.5 MPa, bond strength to concrete 1.2 MPa, grades W8 and F300, combustibility class NG. The coating is supplied in the base colour or tinted; foot traffic after 10–12 hours.
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | floor material |
| Use | production halls, warehouses and logistics, car parks and ramps |
| Base | Portland cement; Cement-based oil- and petrol-resistant non-sparking industrial floor B30 W8, self-levelling coating |
| Colour | in the base colour or tinted |
| Packaging | Dry mix ALFAPOL® VK(i) GSM is supplied in 25 kg polypropylene bags. |
| Application temperature | Application temperature: from +10°C to +25°C |
| Curing | Site foot traffic possible after: 10-12 hours |
| Key properties | Compressive strength at 28 days, min.: 35 MPa; Flexural tensile strength at 28 days, min.: 6.5 MPa; Bond strength to concrete, min.: 1.2 MPa; Thermal conductivity: 0.96; Water resistance grade: W8; Frost resistance grade: F300; Abrasion, max.: 0.8 g/cm²; Combustibility class, GOST 30244-94: NG (non-combustible); Max. aggregate size: 0.63 mm |
| Layer thickness | Single layer thickness: from 5 to 25 mm |
| Consumption | Consumption: 1.75 kg/m²/mm |
| Shelf life | Guaranteed shelf life of the dry mix under normal conditions – 6 months from the date of manufacture. |
| Standards | TU 5745-011-82166262-2012; combustibility class per GOST 30244-94 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Dry hardening mix based on Portland cement and quartz for concrete floors in workshops and open areas, with abrasion no more than 0.4 g/cm².
Heat-resistant concrete floor of class I13 with crushed chamotte for forging, steelmaking, rolling and heat-treatment shops.
Anti-slip epoxy coating for decks and floors on metal and concrete, combustibility group G1, fire hazard class KM2.
Epoxy self-levelling coating with antistatic properties and chemical resistance for workshops, food and pharmaceutical plants and wet areas.
Non-sparking antistatic polyurethane-cement floor for workshops, food and chemical plants, with service temperatures up to +130 °C.
Two-component epoxy primer for mineral substrates before polymer coatings and a base for quartz-filled putty.