ALFAPOL
ALFAPOL VK — cement self-levelling finishing floor
One-component cement self-levelling floor for workshops, warehouses, retail buildings and areas with significant static loads.
Price on request
ALFAPOL
ALFAPOL PU-4VN AS(i) — antistatic polyurethane-cement floor
A three-component polyurethane-cement system for floors that need spark safety, static dissipation and heat resistance at the same time. Shore D hardness is at least 80, compressive strength 40 MPa, flexural strength 12 MPa, electrical resistance below 10⁶ Ω. The coating suits food and pharmaceutical workshops, wet areas and outdoor sites and withstands service temperatures up to +130 °C depending on the version; full load is allowed after 7 days.
Specifications
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | polyurethane-cement floors |
| Use | production halls, warehouses and logistics, food and pharmaceutical, chemically resistant, antistatic/conductive, wet areas, outdoor areas |
| Base | polyurethane-cement; Polyurethane-cement antistatic non-sparking floor, heat-resistant coating |
| Colour | tinting to RAL with restrictions |
| Packaging | Plastic containers: Component A 3.5 kg, Component B 3.0 kg. Polypropylene bag: Component C 25 kg. |
| Application temperature | Application temperature, °C: +10°C to +30°C |
| Curing | At 20 °C: foot traffic after 3 days, medium load after 5 days, full load after 7 days; Recoat interval, h, min.: 24; Foot traffic, h, min.: 72; Full cure, days, min.: 7 |
| Key properties | Service temperature, °C: 6 mm layer from -25 to +80, 9 mm layer from -40 to +120, 12 mm layer from -40 to +130; Shore D hardness, min.: 80; Compressive strength, MPa: 40; Flexural tensile strength, MPa: 12; Bond strength to concrete (failure in concrete), min., MPa: 2.0; Point-to-point resistance, Ohm, less than: 10^6; Point-to-ground resistance, Ohm*m, less than: 10^6 |
| Layer thickness | Layer thickness, mm: 5-15 |
| Shelf life | Shelf life, months: 6 |
| Standards | TU 23.64.10-006-82166262-2018 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ALFAPOL
ALFAPOL
ALFAPOL TOP 200 — liquid topping with microfibre
Cement-based "liquid topping" with microfibre for floors under significant abrasive and impact loads, on old and fresh concrete.
Price on request
ALFAPOL
ALFAPOL K GSM — oil- and petrol-resistant magnesia self-levelling floor
Magnesia self-levelling floor for workshops and warehouses where petrol and mineral oils reach the coating, compressive strength 50 MPa.
Price on request
ALFAPOL
ALFAPOL VB(i) ZIMA — non-sparking concrete floor for the cold season
Non-sparking concrete floor laid at temperatures from −5 to +10 °C, for workshops, warehouses and open areas.
Price on request
ALFAPOL
ALFAPOL EP-2AS — antistatic epoxy self-levelling floor
Solvent-free antistatic epoxy self-levelling floor for production sites, warehouses, food and pharmaceutical premises and retail halls.
Price on request
ALFAPOL
ALFAPOL EP-3 — gloss epoxy floor paint
Solvent-free gloss epoxy paint for floors in workshops, car parks, retail and public buildings, tinting to RAL.
Price on request