ALFAPOL MB — magnesia industrial concrete floor
Non-shrink magnesia concrete floor on crushed granite for workshops, warehouses, retail and public buildings, abrasion up to 0.4 g/cm².

This clear polyurethane sealer for protecting mineral antistatic floors is itself antistatic: point-to-point and point-to-ground resistance is below 10⁶ Ω. The coating is resistant to water and chemical media and elastic; fire hazard class KM1, ignitability group V1, flame spread group RP1. At +20 °C the floor can be walked on after one day, with full load after 5 days.
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | sealers and topcoats |
| Use | chemically resistant, antistatic/conductive |
| Base | polyurethane; Polyurethane antistatic sealer for protecting mineral antistatic floors |
| Packaging | Metal pail – 9 kg |
| Application temperature | Application temperature, °C: +10°C to +30°C |
| Curing | At 10 / 20 / 30 °C: foot traffic after 2 days / 1 day / 20 h, medium load after 5 / 3 / 1.5 days, full load after 7 / 5 / 3 days; Recoat interval, min., h: 12-24 |
| Key properties | Adhesion, min., MPa: 2; Service temperature, °C: from -30 to +50; Point-to-point resistance, Ohm, less than: 10^6; Resistance to ground point, Ohm, less than: 10^6; Fire hazard class: KM1; Ignitability group per GOST 30402-96: V1; Flame spread group: RP1 |
| Consumption | Consumption (roller), kg/m²: 0.1-0.15; Consumption depends on the absorbency of the substrate and is 100-150 g/m² per coat (when applied by roller). |
| Shelf life | Shelf life in factory packaging – 6 months from the date of manufacture.; Shelf life, months: 6 |
| Standards | TU 20.16.56-005-82166262-2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Non-shrink magnesia concrete floor on crushed granite for workshops, warehouses, retail and public buildings, abrasion up to 0.4 g/cm².
Non-sparking concrete floor on crushed marble for workshops, warehouses and open areas: water resistance grade W16, frost resistance grade F300.
Industrial self-levelling compound for thin poured screeds in workshops and warehouses, combustibility class NG.
Cement-based non-sparking thixotropic mix with fine aggregate for repair and finish levelling of substrates in workshops and outdoor areas.
Magnesia self-levelling floor, resistant to petroleum products, non-sparking and static-dissipative, for workshops and warehouses.
Self-levelling non-sparking polyurethane-cement floor with static dissipation for workshops, warehouses, food and chemical plants.