ALFAPOL MB-600 — magnesia concrete floor with quartz aggregate
Non-shrink magnesia floor for workshops, warehouses, retail and public buildings: abrasion no more than 0.4 g/cm², class NG.

This acrylic water-dispersion primer creates an adhesive conductive layer before antistatic mineral-based coatings are applied. The one-component compound is ready to use and odourless; surface and volume resistance are no more than 10⁴ Ω and 10⁴ Ω·m. The next layer is applied after 24 hours at +20 °C and air humidity of 60%; it is supplied in 10 l plastic containers.
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | floor primers |
| Use | antistatic/conductive |
| Base | acrylic dispersion; Conductive water-dispersion primer |
| Packaging | Plastic container: 10 l. |
| Application temperature | Application temperature, °C: from +10 to +25 |
| Curing | Interlayer interval (at substrate and air temperature of +20°C and relative air humidity of 60%), hours: 24 |
| Key properties | Surface electrical resistance (point-to-point), max., Ohm: 10^4; Volume electrical resistance (to ground point), max., Ohm*m: 10^4 |
| Consumption | Consumption, approx., kg/m²: 0.1 |
| Shelf life | Shelf life in intact factory packaging – 1 year.; Shelf life in unopened packaging, months: 12 |
| Standards | TU 2316-008-82166262-2005 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Non-shrink magnesia floor for workshops, warehouses, retail and public buildings: abrasion no more than 0.4 g/cm², class NG.
Epoxy self-levelling coating with antistatic properties and chemical resistance for workshops, food and pharmaceutical plants and wet areas.
Clear gloss polyurethane sealer, resistant to ultraviolet and fading, for concrete and polymer floors.
Vapour-permeable solvent-free conductive epoxy primer for antistatic polymer floors in workshops and warehouses.
Matt polyurethane sealer, resistant to fading and ultraviolet, for protecting mineral and polymer floors.
Corundum "liquid topping" for wear-resistant finished floors with abrasion no more than 0.3 g/cm² in workshops and open areas.