Primer 160 is the standard primer for TAIKOR Floor 710, 720 and 720 AS self-levelling floors: it impregnates and strengthens the concrete substrate. It is also a universal binder for repair compounds and levelling screeds, making it possible to combine priming with filling. It is applied with a trowel, roller or brush, and the fresh layer may be broadcast with calcined quartz sand. Pot life at least 2 hours, overcoating with the next layer after 12–24 hours; adhesion to concrete at least 2 MPa, service from −20 to +50 °C.
| Manufacturer | TAIKOR (TECHNONICOL) — OOO “TECHNONICOL – Construction Systems” |
|---|---|
| Type | floor primers |
| Use | production workshops, warehouses and logistics, car parks and ramps, food and pharmaceutical, retail and public |
| Base | low-viscosity two-component epoxy primer without a strong odour; non-volatiles at least 98 % |
| Colour | uniform, gloss |
| Packaging | pails 5 and 20 l; net weight 5.1; 10.9 kg |
| Application method | impregnation and priming under TAIKOR Floor self-levelling floors; universal binder for repair compounds, levelling screeds, simultaneous priming and filling; 1-2 coats by trowel/roller/brush; A:B = 100:46.8 by weight; broadcasting calcined quartz sand onto the fresh layer is permitted |
| Application temperature | air +5…+25 °C, relative humidity no more than 80 %; substrate from +8 to +25 °C |
| Curing | drying to degree 3 at 20 °C no more than 12 h; recoat window at least 12 h and no more than 24 h; pot life at least 2 h |
| Key properties | Adhesion to concrete at least 2 MPa; tensile strength at least 25 MPa; elongation at break at least 4 %; Shore D hardness about 75; viscosity VZ-246 (4 mm nozzle) 20-80 s; density 1.0-1.2 g/cm3; service temperature -20…+50 °C; strengthens the substrate; resistance to water, petroleum products, salts, dilute alkalis and acids |
| Consumption | 0.15-0.5 kg/m2 (1-2 coats, depending on substrate absorbency); in TN-POL NALIVNOY systems 0.300-0.500 kg/m2 |
| Shelf life | 12 months; storage +5…+25 °C; transport -30…+30 °C |
| Standards | TU 20.30.22-141-72746455-2023; HS code (TN VED) 3214 90 0009 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Elastic polyurethane self-levelling compound without a strong odour for workshops, warehouses, car parks and public buildings; elongation at break from 10%.
Economical thin-layer floor based on TAIKOR Primer 150, quartz sand and Top 425 enamel for warehouses, car parks, stands and footpaths; UV-resistant.
Antistatic polyurethane floor system with copper tape and TAIKOR Floor 720 AS for explosion-hazard production, electronics and filling stations; up to 10⁶ Ω.
Deep-penetrating primer for dustproofing and hardening concrete floors and under TAIKOR Elastic 300 waterproofing; application from −10 °C.
Polyurethane self-levelling floor system based on TAIKOR Primer 160 and Floor 720 for offices, medicine, schools, warehouses and open car parks.
Epoxy primer-enamel for thin-layer polymer floors in car parks, warehouses and cold stores, as well as steel; application from −10 °C.
