Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
BIRSS Izipol — elastic polyurethane self-levelling floor
BIRSS

BIRSS Izipol — elastic polyurethane self-levelling floor

Polyurethane floors

Izipol is a pigmented polyurethane compound that, once cured, stays elastic down to −10 °C and withstands impact and dynamic loads. It is poured as a smooth layer or mixed with quartz sand for an anti-slip and wear-resistant coating, with Polilak sealer as the finish. Tensile strength is 10 MPa, Shore D hardness 65, bond to concrete at least 2.5 MPa; RAL colours.

Specifications

ManufacturerBIRSS — AO “Opytny Zavod Sukhikh Smesey”, Moscow
Typepolyurethane floors
Useproduction halls, chemically resistant, food and pharmaceutical, car parks and ramps, warehouses and logistics, retail and public
Basetwo-component pigmented solvent-free polyurethane compound
ColourRAL colour, tinted to order
Packagingmetal pails, kit (A+B) 20 kg
Application methodpoured (smooth ~2 mm); with quartz sand 2:1 (anti-slip and wear-resistant from 2 mm); finish — Polilak
Application temperaturesubstrate +15…+25 °C (3 °C above the dew point), relative air humidity not more than 80 %, substrate moisture not more than 4 %
Curingdrying to degree 3 — 10–12 h; further work after 12 h; foot traffic after 24 h; full cure after 7 days
Key propertiestensile strength 10 MPa; elastic down to −10 °C; Shore D hardness 65; bond to concrete at least 2.5 MPa (failure in the concrete); service temperature −20…+60 °C; chemical resistance: alkalis 10 %; resistant to impact and dynamic loads
Layer thicknessabout 2 mm (smooth); from 2 mm (anti-slip, wear-resistant)
Consumptionsmooth ~2 mm: 2.5–3 kg/m²; anti-slip from 2 mm: Izipol 2.5 kg/m² + quartz 1.25 kg/m² + top coat 0.5 kg/m²; wear-resistant from 2 mm: Izipol 2.5 kg/m² + quartz 1.25 kg/m² + broadcast
Shelf lifenot more than 12 months in closed original packaging; protect from sunlight, heat and freezing
StandardsTU 2257-018-05668056-01 with amendments No. 1, No. 2

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by BIRSS