KHIMTRAST
KhTA EP V3 epoxy chemical anchor — 385 ml cartridge, 3:1 ratio
Epoxy anchor for M8–M30 studs and rebar in cracked and non-cracked B25–B60 concrete, as well as in stone and brick; 385 ml cartridge.
Price on request
KHIMTRAST
KHIMTRAST PU thin-layer coating — polyurethane coating for concrete floors
The coating cures with air moisture and forms a protective and decorative wear-resistant layer on concrete, designed primarily for foot traffic. It is applied indoors only over KHIMTRAST Primer-NP, with a velour roller or brush, usually in two coats. Taber abrasion resistance is not more than 40 mg, impact strength at least 50 cm, service temperature −25…+60 °C; walking is allowed after 24 h.
Specifications
| Manufacturer | KHIMTRAST — AO “Khimtrast”, Nizhnekamsk |
|---|---|
| Type | polyurethane floors |
| Use | retail and public, warehouses and logistics, production halls |
| Base | one-component moisture-curing polyurethane compound with organic solvents |
| Colour | homogeneous opaque liquid; tinting by agreement |
| Packaging | steel conical pails 10 l – 10 kg and 20 l – 20 kg |
| Application method | over Primer-NP (250–350 g/m², drying for one day); pour and spread with a velour roller or brush, 2 coats recommended; substrate — concrete at least M300, at least 28 days old, moisture not more than 4 %, slope not more than 3 %; indoors only |
| Application temperature | +15…+25 °C (air); substrate 3 °C above the dew point; relative humidity not more than 65 % |
| Curing | drying to degree 3 at 20 °C — 2–3 h; next coat after 12–48 h; foot traffic after 24 h; full cure 3–5 days |
| Key properties | Taber abrasion resistance (CS10/1000 g/1000 rev) not more than 40 mg; impact strength (U-2M) at least 50 cm; flexibility in bending not more than 1 mm; TML hardness 0.4–0.6; adhesion (cross-cut) not more than 1 point; service temperature −25…+60 °C; high wear resistance to foot traffic |
| Layer thickness | at least 100 µm per coat |
| Consumption | 150–200 g/m² in 1 coat (at least 100 µm) by roller or brush (laboratory figure; actual consumption may be 5–40 % higher) |
| Shelf life | 6 months from the date of production at +5…+30 °C in closed original packaging |
| Standards | TU 20.30.22-089-27903090-2021 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by KHIMTRAST
KHIMTRAST
Khimtrast PM Standard polyurea — sprayed waterproofing membrane
Two-component sprayed polyurea for roofs, foundations, vessels and pools; initial cure under 30 s, elongation 350–450%.
Price on request
KHIMTRAST
Khimtrast PM Hard polyurea — wear-resistant sprayed coating
Hard sprayed polyurea for industrial floors for vehicles, dump truck bodies and railway wagons; Shore A 90–100, strength 19–21 MPa.
Price on request
KHIMTRAST
Khimtrast Primer-PM 2K — solvent-free epoxy primer
Two-component epoxy primer for impregnating and strengthening concrete before polyurea; solvent-free, adhesion to concrete at least 2.5 MPa.
Price on request
KHIMTRAST
Khimtrast PM Metal Primer 1K — zinc-rich primer for polyurea
One-component zinc-rich primer for steel, including stainless steel, before polyurea; adhesion to metal at least 1.5 MPa.
Price on request
KHIMTRAST
KHIMTRAST PU Enamel for polyurea, rubber crumb, self-levelling floors — UV-resistant
Gloss aliphatic polyurethane enamel in RAL colours for protecting and colouring self-levelling floors, polyurea and rubber crumb, indoors and outdoors.
Price on request