QTP® 1350 — chemical-resistant thixotropic epoxy enamel
Coloured chemical-resistant epoxy enamel for thin-film protection of floors, walls and ceilings in industrial premises.

A high gloss sets this epoxy paint apart among the QTP paint products. It is applied in a thin coat to concrete primed with QTP 1000 or used as a finish coat of polymer coatings in workshops, retail and decorative premises. Compressive strength is 75 MPa, impact strength 48 kJ/m² and Taber abrasion 60 mg. The colour is selected from the QTP chart or RAL K.
| Manufacturer | QTP — OOO “KTP”, Noginsk |
|---|---|
| Type | epoxy floors |
| Use | production workshops, retail and public buildings, decorative |
| Base | two-component high-gloss epoxy paint for concrete, solvent-free |
| Colour | high gloss; colour from the QTP chart, tinting to RAL K |
| Packaging | 20.8 kg kit: component A 16 kg (20 l pail) + component B 4.8 kg (5 l pail) |
| Application method | thin-film protective coating on concrete (QTP 1000 primer) or finish coat of polymer coatings |
| Application temperature | substrate +10…+30 °C; air +15…+30 °C |
| Curing | at +10/+20/+30 °C: foot traffic after 32 / 20 / 16 h; light load after 7 / 3 / 2 days; full load after 10 / 7 / 6 days |
| Key properties | compressive strength 75 MPa; flexural strength 62 MPa; tensile strength 30 MPa; impact strength 48 kJ/m2; hardness 82; Taber abrasion 60 mg; heat resistance: continuous +50 °C, up to 7 days +80 °C, up to 12 h +100 °C |
| Consumption | on concrete: QTP 1000 primer 0.25–0.35 + 2 coats of 0.15–0.25 kg/m2 each; on anti-slip epoxy coatings: 0.65 + 0.30 kg/m2 |
| Shelf life | 12 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight |
| Standards | SGR KG.11.01.09.008.E.002319.06.18 dated 19.06.2018 (epoxy enamels, TU 2312-003-28912903-2014; grade listed); test methods DIN / EN ISO / Taber |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Coloured chemical-resistant epoxy enamel for thin-film protection of floors, walls and ceilings in industrial premises.
Polyurethane compound for sealing pores and bonding rubber mats and underlays in sports floor systems.
Multi-purpose budget epoxy primer with a pigmented component for polymer floors, filler coats and repair compounds.
Thixotropic solvent-free epoxy paint for protecting concrete on floors and vertical surfaces.
Moisture-curing solvent-free polyurethane primer for polymer systems, dustproofing concrete and work at temperatures down to −20 °C.
Polymer-hybrid composition with 700 % elongation — a membrane under rigid coatings, a chemical-resistant sealant and waterproofing.