Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
QTP® 1050 — thixotropic epoxy paint for floors and walls
QTP

QTP® 1050 — thixotropic epoxy paint for floors and walls

Thixotropy allows this epoxy paint to be applied not only to floors but also to vertical concrete surfaces. It forms a thin-film protective coating or a finish coat in production and storage premises. Compressive strength is 65 MPa, hardness 88 and impact strength 38 kJ/m². The kit weighs 21.4 kg; the shelf life is 12 months.

Specifications

ManufacturerQTP — OOO “KTP”, Noginsk
Typeepoxy floors
Useproduction workshops, warehouses and logistics
Basetwo-component thixotropic epoxy paint for concrete, solvent-free
Colourcolour from the QTP chart, tinting to RAL K
Packaging21.4 kg kit: component A 20 kg (20 l pail) + component B 1.4 kg (6 l pail)
Application methodthin-film protective coating on vertical and horizontal concrete; finish coat
Application temperaturesubstrate +10…+30 °C; air +15…+30 °C
Curingat +10/+20/+30 °C: foot traffic after 24 / 12 / 10 h; light load after 6 / 3 / 2 days; full load after 10 / 7 / 5 days
Key propertiescompressive strength 65 MPa; flexural strength 47 MPa; tensile strength 24 MPa; impact strength 38 kJ/m2; hardness 88; Taber abrasion <60 mg; heat resistance: continuous +50 °C, up to 7 days +80 °C, up to 12 h +100 °C
Consumptionon concrete: QTP 1000/1010 primer 0.25–0.35/0.3–0.5 + 1st coat 0.25–0.35 + 2nd coat 0.15–0.25 kg/m2; on anti-slip coatings: 0.75 + 0.35 kg/m2
Shelf life12 months from the date of manufacture in unopened containers, in a dry, cool room at +15…+25 °C, protected from sub-zero temperatures and direct sunlight
StandardsSGR KG.11.01.09.008.E.002319.06.18 dated 19.06.2018 (epoxy enamels, TU 2312-003-28912903-2014; grade listed); test methods DIN / EN ISO / Taber

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by QTP