Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-ED Self-levelling Floor Premium — decorative epoxy self-levelling floor
ELAKOR

Elakor-ED Self-levelling Floor Premium — decorative epoxy self-levelling floor

Epoxy floors

This premium compound is designed for “designer” floors: it flows perfectly and is suitable for shopping centres, supermarkets, bars, restaurants and medical institutions. It is laid over levelled and primed concrete, sand concrete and cement screeds with closed pores, spread with a notched squeegee rake and rolled with a spiked roller. According to the technical data sheet, the floor is used indoors, Shore D hardness is 73–75, Taber abrasion 24 mg, fire hazard class KM2.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typeepoxy floors
Useretail and public premises, food and pharmaceutical, chemically resistant, decorative
Basetwo-component epoxy compound with perfect flow; composition: epoxy resin, hardener, pigments, fillers, functional additives
Colourcoloured
PackagingComponent “A” 22 kg + Component “B” 4.4 kg = Kit 26.4 kg
Application methodDecorative “designer” self-levelling coatings on concrete, sand concrete, cement levelling screeds (surface levelled, primed, pores closed). Relative air humidity not more than 80%, surface 3°C above the dew point, surface temperature difference not more than 4°C. Squeegee rake with a notched blade or notched trowel, roll with a spiked roller; working time not more than 30 minutes.
Application temperaturesurface and air: optimum +15°C…+22°C; permissible +5°C…+25°C; materials: optimum +15°C to +20°C, permissible +15°C…+25°C
Curingpot life on the surface at (20±2)°C at least 30 min; drying to degree 3 not more than 8 h
Key propertiesA:B ratio by weight 5 : 1 (may vary); solids content 100%; density 1.32±0.02 kg/l; Shore D hardness (28 days) 73-75; Taber abrasion SC-10, 1.0 kg, 28 days – 24 mg; film resistance to static exposure to water at least 48 h, xylene at least 48 h, butyl acetate at least 24 h (at (20±2)°C); fire hazard class KM2; chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Consumption1.32 kg (A+B) per 1 m² at a layer thickness of 1 mm; minimum consumption for “perfect” flow 1.5 kg/m²
Shelf lifestore and transport at temperatures from 0° to +25°C
StandardsFire safety certificate “Elakor-ED”; Spark safety – epoxy self-levelling floor “Elakor-ED”; ROSTEST letter “Elakor-ED”

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR