Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-PU Lyuks Emal SK PROF — professional lightfast enamel
ELAKOR

Elakor-PU Lyuks Emal SK PROF — professional lightfast enamel

Polyurethane floors

The SK PROF line enamel is the professional version of the lightfast Lyuks paint with a high gloss of 94–98 %. It is used for coloured paint-on coatings on floors, walls, structures and tanks, protective topcoats over polymer coatings, decorative floors with chips and flakes, and quartz and anti-slip coatings. It is applied in 2–3 coats over polyurethane primers at +5…+22 °C; lightfastness is 7 (“excellent”), film tensile strength at least 27 MPa, fire hazard class KM1.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typepolyurethane floors
Useproduction workshops, warehouses and logistics, car parks and ramps, retail and public premises, food and pharmaceutical, wet rooms, outdoor areas, chemically resistant, decorative
Basetwo-component polyurethane lightfast paint; acrylic-urethane prepolymers, organic solvents, pigments, functional additives
Colourcoloured; gloss at 60° 94-98%
PackagingComp. “A” 18 kg + Comp. “B” 3 kg = Kit 21 kg
Application methodColoured paint-on coatings for floors, walls, structures, tanks; UV-protective topcoats over polymer coatings; decorative coatings with chips, flakes, glitter; quartz-filled and anti-slip coatings. On surfaces primed with “Elakor-PU” polyurethane primers (or fillers). Brushes, rollers (12-14 mm nap), airless (without thinner) or air spraying (5-10% xylene or solvent); 2-3 coats. Relative air humidity not more than 80%; surface moisture not more than 4 wt%; 3°C above the dew point.
Application temperatureair and surface: from +5°C to +22°C; material: from +15°C to +22°C
Curingpot life at +20°C at least 40 min; drying to degree 3 at +20°C, relative air humidity 65% not more than 1 h; forced drying up to +80°C (not more than 10 min); drying between coats at +15…20°C – 8-12 h, but not more than 24 h; after application at +15…20°C: foot traffic – 3 days, full mechanical load – 7 days, full chemical load – 14 days
Key propertiesmix viscosity VZ-4 20-25 s; solids content at least 54%; density 1.01-1.03 kg/l; service temperature range at relative air humidity up to 80% from -60°C to +100°C, at relative air humidity above 80% from -40°C to +80°C; film water absorption not more than 0.1%; film tensile strength at least 27 MPa; elongation at break at least 20%; impact strength (U-2M) direct 100 cm, reverse 50 cm; flexibility not more than 2 mm; lightfastness 7 (excellent) per ISO 9370-2017; Taber abrasion CS-10, 1000 g, 28 days – 24 mg; resistance to climatic factors 1 point (GOST 9.401 method 2); frost resistance at -60°C at least 75 cycles; fire hazard class KM1; Shore D at 28 days 73-75; gloss at 60° 94-98%; chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Consumptionpaint-on coatings: 2-3 coats, 100-150 g/m² per coat; sealing coat of quartz-filled coatings: 1-2 coats, up to 600 g/m² per coat
Shelf life8 months in the manufacturer's original packaging; store and transport at temperatures from -30°C to +25°C

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR