Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-PU Eko-Emal-60 — food-grade polyurethane paint
ELAKOR

Elakor-PU Eko-Emal-60 — food-grade polyurethane paint

Polyurethane floors

The Eko enamel cures by air moisture and is designed for direct contact with bulk food products and drinking water at temperatures up to +40 °C. It is applied in two coats over “Elakor-PU” primers and fillers on concrete floors, tile, stone, brick and wood, as well as on steel, aluminium and copper — in drinking water tanks, dry food stores, malt houses, silos and swimming pools. Film gloss is 93–97 %, tensile strength at least 65 MPa, and application is permitted from −30 to +25 °C.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typepolyurethane floors
Usefood and pharmaceutical, wet rooms, chemically resistant
Baseone-component moisture-curing food-grade polyurethane paint; composition: urethane prepolymers, organic solvents, functional additives
Colourcoloured liquid / coloured film
Application methodCoatings in direct contact with bulk food products and drinking water at temperatures up to +40°C. Substrates: concrete, sand concrete (concrete floors, terrazzo, tile), cement self-levelling floors, stone, brick; wood; steels, aluminium, copper. Applied over “Elakor-PU” primers, Elakor-PU fillers, sand-filled layers; 2 coats by roller, brush or airless spraying. Relative air humidity not more than 80%, surface moisture not more than 4 wt%.
Application temperatureair and surface: from -30°C to +25°C; material temperature: from +10°C to +25°C
Curingdrying time to degree 3 at +20°C – not more than 6 h; drying between coats: above 0°C – 4-8 h, but not more than 24 h; below 0°C – 16-24 h, but not more than 48 h
Key propertiesviscosity (VZ-4 cup) 30-45 s; solids content at least 59%; density 1.07 g/cm³; service temperature range from -60°C to +120°C (up to 30 min – up to +180°C); water absorption not more than 0.1%; film tensile strength at least 65 MPa; elongation at least 20%; impact strength U-2M 100 cm, reverse impact 100 cm; hardness (ME-3/TML) at least 0.6/0.4 relative units; Shore D at 28 days 75-78; flexibility not more than 1 mm; gloss at 60° 93-97%; adhesion to concrete 1.55 MPa (failure in concrete), to magnesia concrete 3.68 MPa, to St3 steel 63.7 MPa (GOST 15140); abrasion resistance 37 kg/µm, 1.5 g/m²; Taber abrasion CS-10, 1000 g – 9 mg; resistance to climatic factors 1 point (GOST 9.401 method 2); frost resistance at -60°C at least 75 cycles; fire hazard class KM1; chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Consumption120-170 g/m² per coat, 2 coats (additional coats permitted)
Shelf life6 months in the manufacturer's original packaging; store and transport at temperatures from -40°C to +25°C
StandardsCertificate of conformity (fire safety); Certificate of conformity; Approval for use in children's and healthcare institutions; NIKIMT report “Decontaminability and radiation resistance”

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR