Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-ED Emal-2K/80 AST-7 / AST-6 (antistatic enamel) — epoxy paint
ELAKOR

Elakor-ED Emal-2K/80 AST-7 / AST-6 (antistatic enamel) — epoxy paint

Epoxy floors

The enamel is applied by roller, brush or airless spraying in two coats over any building substrate primed with Elakor-ED epoxy primers. The AST-7 modification provides static-dissipative and conductive coatings, AST-6 conductive ones; specific surface resistance is less than 10⁹ Ω, and the coating is spark-safe. Solids content is at least 80 %, Shore D hardness 83–85; at +15…+20 °C the floor can be walked on after 3 days, full chemical load after 14 days.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typeepoxy floors
Useproduction workshops, warehouses and logistics, retail and public premises, food and pharmaceutical, chemically resistant, antistatic/conductive
Basecoloured two-component epoxy compound; epoxy resin, hardener, pigments, fillers, functional additives
Colourcoloured
Packaging“A” + “B” = kit 20 kg + 10 kg = 30 kg
Application methodAntistatic paint-on floor coatings on surfaces of any building materials primed with Elakor-ED epoxy primers. Rollers, brushes, airless spraying; 2 coats. Relative air humidity not more than 80%; surface 3°C above the dew point.
Application temperatureair and surface: optimum +15…+23°C; permissible +5…+25°C; material: optimum +15…+20°C, permissible +10…+25°C
Curingpot life on the surface at (20±2)°C at least 40 min; drying to degree 3 not more than 10 h; drying between coats at +15…20°C – 16-12 h; after application at +15…20°C: foot traffic – 3 days, full mechanical load – 7 days, full chemical load – 14 days
Key propertiesA:B ratio 2:1; solids content at least 80%; density 1.1 kg/l; ultimate compressive strength at least 70 MPa; adhesion to glass not more than 1 point (GOST 15140); impact strength (U-2M) at least 60 cm; flexibility (bend test) not more than 5 mm; Shore D at 28 days 83-85; Taber abrasion SC-10, 1.0 kg, 28 days – 23 mg; gloss at 60° 87-90%; Rs AST-7, AST-6 less than 10^9 Ω (GOST IEC 61340-4-1-2017); Rg with an antistatic layer thickness of not more than 1.5 mm: AST-7 (V=100 V) 5x10^5-10^7 Ω, AST-6 (V=10 V) 5x10^5-10^6 Ω; conventional lightfastness at least 100 h; resistance to water and xylene at least 48 h, butyl acetate at least 24 h; fire hazard class KM2; chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Consumption2 coats, 130-150 g/m² per coat
Shelf life12 months in the manufacturer's original packaging; store and transport at temperatures from +5° to +25°C
StandardsSpark safety test report for a 2 mm thick coating; Spark safety test report for a 0.25 mm thick coating; State registration certificate “Elakor-ED”, Customs Union; Fire safety certificate “Elakor-ED”; Comprehensive tests of “Elakor-ED” coatings; NIKIMT report on decontaminability and radiation resistance “Elakor ED”; ROSTEST letter “Elakor-ED”

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR