ELAKOR
Elakor-PU Self-levelling Floor BR — odourless solvent-free PU self-levelling floor
Solvent-free odourless polyurethane self-levelling floor for work in operating and enclosed workshops, warehouses and retail premises.
Price on request
ELAKOR
Elakor-MB2 Acrylic Lak — water-based acrylic varnish for dust-proofing concrete
The acrylic varnish is supplied as a concentrate that is diluted with water one to one before use, and it contains no organic solvents. It is used to dust-proof concrete and sand-concrete screeds under parquet, laminate, linoleum and raised floors, to seal the surface after fluating or water-repellent treatment, and to prime the substrate under coloured acrylic coatings. The film is transparent, vapour-permeable and UV-resistant; new concrete can be treated after 3 days, substrate moisture not more than 7 %, temperature not lower than +5 °C.
Specifications
| Manufacturer | Elakor — OOO “TEOKHIM-PROM”, Moscow Region |
|---|---|
| Type | varnishes and topcoats |
| Use | outdoor areas, decorative |
| Base | one-component water-based acrylic varnish (concentrate, diluted with water 1:1); without organic solvents, odourless |
| Colour | transparent film, UV-resistant |
| Packaging | plastic canister 30 kg |
| Application method | Protective and decorative acrylic impregnation; priming under coloured acrylic coatings; sealing after fluating or water-repellent treatment; dust-proofing of concrete and sand-concrete screeds (under parquet, laminate, linoleum, raised floors). New (after 3 days of hardening) and old concrete substrates; substrate moisture not more than 7 wt%. Dilute before use: 1 litre of water per 1 litre of concentrate. |
| Application temperature | air and substrate: at least +5°C |
| Key properties | film vapour-permeable, fully transparent, UV-resistant |
| Consumption | B17.5 (M200) – 0.3-0.4 kg/m² for two coats; B22.5 (M300) – 0.2-0.3 kg/m² for one or two coats; B25.0 (M350) – 0.15-0.2 kg/m² for one coat |
| Shelf life | 12 months in the manufacturer's original packaging; store and transport at temperatures from 0°C to 30°C |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ELAKOR
ELAKOR
Elakor-PTs T1 — polyurethane-cement self-levelling floor
Self-levelling polyurethane-cement floor for workshops and warehouses with light and moderate mechanical loads and heat resistance requirements.
Price on request
ELAKOR
Elakor-PU Self-levelling Floor Classic — uniform-colour polyurethane self-levelling floor
Hard-elastic impact-resistant polyurethane self-levelling floor with uniform colour, compressive strength 61 MPa.
Price on request
ELAKOR
Elakor-ED Grunt-2K/100P — solvent-free pore-filling epoxy primer
Solvent-free epoxy primer for concrete, tile and stone under polymer floors, also a base for filler and skirtings with sand.
Price on request
ELAKOR
Elakor-PU Emal-60 Semi-Matt — low-gloss polyurethane paint
Semi-matt polyurethane enamel for coloured and decorative floors, applied over a base coat of semi-gloss Emal-60.
Price on request
ELAKOR
Elakor-ED Emal-2K/80 AST-7 / AST-6 (antistatic enamel) — epoxy paint
Antistatic epoxy paint for paint-on floors in AST-7 and AST-6 modifications, applied in 2 coats over epoxy primer.
Price on request