Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Epoksipol-2 “COMFORT” — high-strength epoxy floor enamel
KRASKO

Epoksipol-2 “COMFORT” — high-strength epoxy floor enamel

Epoxy floors

The enamel uses a dearomatised thinner, so painting can be done without stopping production, including in food and pharmaceutical facilities. The coating is impact-resistant, withstands wheeled traffic and wet cleaning, and is resistant to acids and petrochemicals, and to water and fuels and lubricants for at least 72 h. It is applied over Epoksol-2MS primer on concrete of at least M250, the second coat after 8–12 h; the coating reaches full strength in 5 days.

Specifications

ManufacturerKRASKO — OOO “NPO KRASKO”, Moscow Region
Typeepoxy floors
Useproduction halls, warehouses and logistics, food and pharmaceutical, chemically resistant, retail and public
BaseTwo-component epoxy enamel: modified high-molecular epoxy resin, strengthening components, dearomatised thinner
ColourSemi-gloss; RAL 7040 (per the description), grey
Packaging27 kg (available from one package)
Application methodConcrete at least M250; finish coat over Epoksol-2MS epoxy primer. Substrate: compressive/pull-off strength at least 20/1.5 MPa, moisture not more than 5 %; grinding. Thinning with xylene, R-universal; roller for rough surfaces, brush; mixing and application — within 30 min at 20 °C; second coat after 8–12 h.
Application temperaturenot below +5 °C
CuringDrying to degree 3 at 20 °C — not more than 12 h; foot traffic — 24 h (100 µm) / 36 h (200 µm); final strength development — 5 days
Key propertiesSolids by volume comp. A 99 %; hiding power (dry film basis) not more than 80 g/m²; film impact strength at least 50 cm, bending not more than 2 mm; resistance to water and fuels and lubricants at least 72 h; service temperature from −40 °C to +100 °C
Layer thickness100 or 200 µm dry film
Consumption160–200 g/m² at 100 µm; 350–400 g/m² at 200 µm (theoretical consumption A+B)
Shelf life12 months from the date of manufacture; storage from −30 °C to +40 °C
StandardsTU 20.30.12-004-01524656-2017; state registration certificate; preparation to SP 29.13330.2011 and SP 71.13330.2017

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by KRASKO