Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Polibetol-2 “COMFORT” — two-component polyurethane floor enamel
KRASKO

Polibetol-2 “COMFORT” — two-component polyurethane floor enamel

Polyurethane floors

This two-component enamel on a dearomatised solvent allows floors to be painted without stopping production, including at sites with stricter sanitary and hygiene requirements. It is applied in a thick coat over Proteksil-2 “COMFORT” primer-impregnation; the coating withstands impact and vibration loads, fuels and lubricants and metalworking fluids. Resistance to petrol and oils is at least 72 h, to water at least 240 h; light foot traffic is allowed after 6 h.

Specifications

ManufacturerKRASKO — OOO “NPO KRASKO”, Moscow Region
Typepolyurethane floors
Usewarehouses and logistics, car parks and ramps, retail and public
BaseTwo-component polyurethane enamel: blend of polyurethane resins, complex of strengthening components, dearomatised solvent
ColourSemi-matt, anti-slip; RAL 7040, other colours to order from 300 kg
Packaging20 kg
Application methodFinish coat over Proteksil-2 “COMFORT” primer-impregnation (enamel 4–5 h after priming). Substrate: compressive/pull-off strength at least 20/1.5 MPa, moisture not more than 4 %; grinding. Thinning and cleaning — xylene; roller for rough surfaces, brush; mixing and application — within 60–70 min at +20 °C; second coat after 6 h; pot life at least 1 h.
Application temperaturefrom +5 °C to +35 °C
CuringDrying to degree 3 at 20 °C — not more than 6 h; light (gentle) foot traffic — after 6 h; final strength development — 7 days
Key propertiesSolids of comp. A 87 %; conventional viscosity by VZ-246 cup (nozzle 6) 75–120 s; service temperature range after curing −40/+40 °C; resistance to petrol and oils at least 72 h, to water at least 240 h
Layer thicknessSingle application in a layer of up to 300 µm; consumption is given for a wet film of 100 µm
Consumption150–160 g/m² (at a wet film thickness of 100 µm)
Shelf life9 months from the date of manufacture; storage from −40 °C to +35 °C
StandardsTU 20.30.12-042-01524656-2020; preparation to SP 29.13330.2011 and SP 71.13330.2017

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by KRASKO