Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Polibetol-Ultra — gloss polyurethane enamel for concrete floors
KRASKO

Polibetol-Ultra — gloss polyurethane enamel for concrete floors

Polyurethane floors

Polibetol-Ultra is applied over Polibetol-Grunt primer even in the cold — at temperatures not below −5 °C, making sure there is no frost on the substrate. The gloss coating is rigid yet elastic and impact-resistant, withstands petrol, oils and water for at least 72 h and performs from −60 to +100 °C. The enamel is ready to use and is applied by brush or roller in one or two coats; light loads are allowed after 24 h.

Specifications

ManufacturerKRASKO — OOO “NPO KRASKO”, Moscow Region
Typepolyurethane floors
Usewarehouses and logistics, car parks and ramps, retail and public
BaseOne-component polyurethane enamel: blend of polyurethane polymers, non-toxic solvent without a pungent odour, fillers and additives
ColourGloss; grey
Packaging24 kg
Application methodConcrete at least M250; finish coat over Polibetol-Grunt. Substrate: compressive strength at least 20 MPa, pull-off strength at least 1 MPa, moisture not more than 4 %; relative air humidity 60–90 %; grinding. Ready to use (if necessary, xylene not more than 3–5 %); brush or roller for rough surfaces, 1–2 coats; recoat drying 24 h at (20±2) °C.
Application temperaturenot below −5 °C (make sure there is no frost on the substrate)
CuringLight (gentle) foot traffic — after 24 h; final strength development — 7–10 days
Key propertiesSolids 94 %; conventional viscosity by VZ-246 cup (nozzle 6) 30–60 s; film impact strength at least 50 cm; pendulum hardness (TML-A) at least 0.45; fineness of grind not more than 80 µm; resistance to petrol, oils, water at least 72 h; service temperature from −60 °C to +100 °C
Layer thicknessSingle application in a layer of up to 200 µm; consumption is given for a layer of 90–100 µm
Consumption150–160 g/m² at a layer thickness of 90–100 µm (theoretical)
Shelf life2 months from the date of manufacture; storage from −30 °C to +35 °C
StandardsTU 20.30.12-002-01524656-2017; sanitary and epidemiological conclusion; preparation to SP 29.13330.2011 and SP 71.13330.2017

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by KRASKO