Sazilast (SAZI)
Sazilast 24 Komfort — polyurethane sealant for wide facade joints
Polyurethane facade sealant for wide panel joints: increased sag resistance, applied at temperatures from −15 to +45 °C.
Price on request
Sazilast (SAZI)
Sazilast 501 — pourable polysulfide sealant for road joints
Sazilast 501 from the road series 500 is a two-component polysulfide pourable sealant for expansion joints in concrete and reinforced concrete road pavements, bridge elements, tunnels and water conduits, including joints under direct mechanical load. Nominal tensile strength at break is at least 1.3 MPa, fatigue endurance is at least 30,000 cycles, and flexibility is retained down to −50 °C. The joint is resistant to long-term contact with groundwater, oils, fuel, acid and alkali solutions, but contact with drinking water is excluded.
Specifications
| Manufacturer | Sazilast (SAZI) — OOO PK “SAZI”, Ramenskoye |
|---|---|
| Type | joint sealants |
| Use | joints and junctions, bridge structures, tunnels and metro |
| Base | two-component pourable polysulfide sealant (component A — polysulfide oligomer, V — based on manganese dioxide) |
| Colour | grey to dark grey |
| Packaging | 15.4 kg kit: sealing paste 14 kg + curing paste 1.4 kg |
| Application method | mix the base paste with the curing paste using a low-speed drill for at least 10 min; in cold weather keep the kit in a warm room for at least a day; do not thin with solvents; apply by spatula only to a dry surface cleaned of dirt, grease, laitance and old sealant; in winter remove ice and frost; brush application is possible |
| Application temperature | recommended range from −15 to +40 °C |
| Curing | curing 48 h at 23 °C; pot life at least 2 h at 23 °C |
| Key properties | nominal tensile strength at break at least 1.3 MPa; elongation at break at least 250% (on joint specimens), at −20 °C at least 75%; Shore A hardness after 24 h at least 40; water absorption not more than 0.5% by mass; UV ageing at least 1000 h; flow at least 30 mm; fatigue endurance at least 30,000 cycles; flexibility not higher than −50 °C; tack temperature not lower than +50 °C; service from −60 to +90 °C; resistant to long-term contact with groundwater, oils, fuels, acid and alkali solutions; contact with drinking water is not permitted |
| Consumption | 320 g/linear m (joint 20 mm wide, 10 mm layer) |
| Shelf life | 6 months at −20…+30 °C in undamaged factory packaging |
| Standards | STO 134-37547621-2016; certificate of conformity (manufacturer OOO PK “SAZI”, production — Ramenskoye) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Sazilast (SAZI)
Sazilast (SAZI)
Sazilast 9 — hybrid sealant for joints and cracks
One-component hybrid sealant for joints of block and frame-monolithic buildings, cracks and door frames; joint movement up to 15%.
Price on request
Sazilast (SAZI)
Sazilast 13 — one-component polyurethane joint sealant
Ready-to-use polyurethane sealant for panel joints, standing-seam roofs, floor joints and sandwich panels; joint movement ±25%.
Price on request
Sazilast (SAZI)
Sazilast 25 — polyurethane sealant for facade panel joints
Two-component polyurethane sealant for panel joints and facade cracks in above-ground parts of buildings; permissible joint movement ±25%.
Price on request
Sazilast (SAZI)
Sazilast 51 — two-component thiokol joint sealant
Thixotropic polysulfide sealant for vertical and overhead joints of bridges, tunnels and roofs; applied at temperatures from −15 to +40 °C.
Price on request
Sazilast (SAZI)
Sazilast 52 — pourable thiokol sealant for horizontal joints
Free-flowing polysulfide sealant for pouring into horizontal and hard-to-reach joints of roofs, roads, bridges and tunnels; elongation at least 200%.
Price on request